• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. However If windows with double panes are anchored by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this case you'll need to locate some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass so that any shards will fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will keep water and drafts from entering your home until a professional is able to fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. In time, they could be affected by a variety of issues, including sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens in the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is an easy process, but it's simpler when you have a person to assist in holding the frame in place.

Make sure that the uPVC hinges are closed and open in the correct direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to give advice.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also be unbalanced due to wear, creating an opening between the frame and sash. If they are damaged beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

Your windows made of upvc window repairs will remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come a point where it is more economical to replace them than fix them. If you have any problems with your upvc window repairs near me window you should consult a professional as soon as possible.