• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

upvc window repair is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass so that any shards will fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional comes out to fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is large, you may be interested in the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, with time, they can suffer from a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act immediately if you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it can be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and do an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on how serious the issue is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease It could be hinges at fault. They can be replaced by any competent DIYer and can be done within a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It's easy to change the hinges on a window but it's much easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either by opening the window incorrectly or a faulty installation in the factory. Sending us a picture via our website will often resolve the problem. We are more than happy to give suggestions.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also lower the possibility of a window sticking and help prevent corrosion. It is recommended to do this once a year. WD40 or other solvent-based oils are not recommended as they can damage your upvc window repairs near me windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. Firstly the hinges, again because of wear and tear, could become misaligned. This causes a gap to form where the sash meets the frame. These can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to get them aligned or replaced. Second, the interlock can be misaligned. This is located on the hinge's side and could require to be cleaned. In some instances it is possible to replace the hinges.

The next common reason for draughts is window seals. These are prone to wear or damaged over time and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you have any problems with your upvc window you should consult an expert as soon as possible.