• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the old panes. In this instance you'll need to find some plastic spacers to help the new pane to fit properly into the frame of the window.

If you're planning to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your property until a professional arrives to fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time they may be afflicted by a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window repair which is sagging. To accomplish this, you'll need open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're happy with the fit, tighten the screws to ensure they remain in the right place.

If you can't reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

Upvc Window Repair handles could also become loose. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism getting worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform a test fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's important to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal than the frame. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it blows open with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. Changing a window hinge is essentially a simple procedure, but it is simpler with someone else to help hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should open.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. This can often be resolved by sending us a picture via our website and we will be more than happy to give you advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the chance of windows sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. First, the hinges because of wear and tear, may become displaced, which causes an opening to appear between the sash and the frame. They can be repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge of the window and can be misaligned. Again, it's possible to just give them a clean but in certain cases, it may be necessary to get them replaced.

The next common reason for draughts are the window seals, these can become worn down or damaged over time and let air escape through the gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will lessen the risk of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be positioned on the windowsill on top. They can help block out cold air and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach an point at which it is more cost-effective to replace them rather than fix them. So, if you are experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.