• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and keep their homes warm. In the event of major damages, like broken glass or a shattered frame, window replacement may be required.

However, many other issues can be fixed to prolong the life of your windows. Common problems include:

Cracked or Broken Panes

Glass that is cracked can be caused by a lawnmowers who throws rocks in the wrong direction or a tree branch being blown by strong winds. This is not only visually awful, but it could result in more energy costs because broken glass lets cold air into your home. It's fairly simple to repair windows with broken panes.

Begin by carefully removing the glass using gloves and sunglasses. You may have to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, use a soft paper towel or cloth to clean the glass's surface and the frame's wood.

After cleaning the area, apply a silicone caulking that is waterproof to the frame's perimeter. This will prevent water from getting into the frame through the cracks and cause further damage.

If you have double-paned glass, cracks that are severe could damage the gas layer that lies between the panes and make your windows less efficient in insulating. If the crack is severe enough to threaten the quality of the glass or the glass has an inner pane completely missing, it's time to contact an expert.

Cracks caused by thermal stress can occur when there's an extreme temperature difference between your home and the outside. The glass is then able to expand and shrink. If this happens on two portions of a window, it's probably best to replace the window rather than trying to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready to be replaced. It will also keep out cold and bugs. You can cut the length of a nylon stocking to completely cover the crack and then glue it to the surface with duct tape. This isn't an indefinite fix, but it will keep insects out and cold air away from your home. If your windows are old and you're starting to notice cracks in the glass, it's an excellent idea to talk with your local window manufacturer about whether replacing the entire window might be a better option for you.

Rotten Wood

Wood rot is a typical problem for windows. It can ruin the appearance of a home and it can also pose danger to your safety. It is possible to repair rotted wood. First, you will need to ensure that the root of the rot has been taken care of. This can be done by looking for roof leaks and gutters that aren't functioning, cracked caulking and any other areas that allow water to enter the wood.

You will then need to take out the rotten components of the window frame. This can be accomplished with a claw hammer, chisel or a rasp. After removing the rotten wood, you'll need replace it with fresh wood. Pre-treated wood is recommended for this project, as it will resist decay. If you are unable to replace the rotted wood then you can use wood hardener or filler to strengthen the damaged area. The majority of hardware stores carry this type of product. Follow the directions on the label of the product to ensure the best results.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. Apply a water-resistant sealant to the wood. A product like Sikkens is an excellent option to accomplish this task.

It is also possible to use a two-part epoxy filler to protect the wood from further damage. It is easy to apply and gives an excellent finish. It is crucial to follow the directions on the label. Once the epoxy filler has dried, you are able to sand the surface of the wood. Start with a rough sandpaper and then move on to a smoother grade.

You don't want to expose the rotted part to more moisture. So, it's a good idea to cover the area that has been repaired with an oil-based primer that will help protect it from moisture. After that, you can apply the waterproof wood sealant.

It won't open

A window that won't open can be the result of various reasons. Wood frames can warp when exposed to rainy weather, or the house may have settled or someone could have nailed it shut to protect themselves. However, with a bit of patience and the right tools, all windows that are locked can be opened.

One of the most frequent causes of a window that won't open is accumulated gunk or debris on its moving parts. The buildup of dirt and grime on the sliding tracks, hinges, and locks over time, notes Acme Glass. Metal hardware can also rust when it comes into contact humidity and direct sunlight. Spraying grease on these areas can help to prevent oxidation and keep your windows functioning well.

The pulleys used to raise or lower the window could be loosened, or break. These components can lose their tension and get blocked particularly if the window is located at least two stories above the ground.

If you are having difficulty opening a door, use a pry-bar to gently open the door. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.

Another common problem with windows that don't open is a faulty spring that keeps the window jamb from rising or lowering. Depending on who manufactured your windows, you'll be required to refer to the manual of your owner for additional instructions.

If you've tried cleaning the moving parts of your windows and then lubricating them but they're still unable to open It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to useless because a window that isn't properly closed can expose your home to water damage and burglary. Contact us today for more information about our replacement windows as well as our services!