• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. However, if you have double pane windows that are secured by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall onto the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need close the window and perform a test fit. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, upvc window repairs near me window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on how serious the issue is, old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease, it may be hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to replace a hinge on a window however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or a faulty installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to provide assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also decreases the possibility of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges can also be disaligned as a result of wear, which can cause an opening between the frame and sash. If they're beyond repair, it may be required to realign them. Second, the interlock can be unbalanced. This is located on the hinge's side and could require to be cleaned. In some cases it is possible to replace these.

The second most frequent reason for draughts is window seals. They are susceptible to being worn out or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc window repair near me windows will continue to provide excellent insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to simply replace them than to repair them. So, if you're having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.