• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they typically fit into old frames very easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you are going to try to remove the glass panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will stop water and drafts from entering your property until a professional arrives to fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might think about the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a variety of issues such as sliding. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. After that, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're happy with the fit, you can tighten the screws to ensure they remain in place.

If you cannot reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

upvc window repair handles can also become loose. This is usually due to screws that have loosened over time, but it could be due to the mechanism of the handle wears out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform an initial test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is important to act if you wake up every morning to find a smoky wall and wet floors. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is an easy fix that can be done by any DIYer who is competent. Based on the severity of the issue the old caulking may require removal before a new layer of caulk can be put on. When it comes to uPVC repair, you should avoid 'over-caulking'. This will make your window more difficult to clean and decrease its energy efficiency.

Verify that the drainage holes are free of debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double glazed window repairs-glazed glass it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens with an ease. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change the hinges on a window, but it's simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to provide assistance.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the possibility of a window sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be disaligned as a result of wear, creating a gap where the sash and frame meet. They can be repaired by giving them a good clean, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. The interlock may be misaligned. This happens on the hinge's side and may need to be cleaned. In some cases it is possible to replace the hinges.

These seals can wear down or get damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach a point where it is more cost-effective to replace them rather than fix them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.