• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers that aid the new pane in being able to fit perfectly into the window repairs frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the cloth rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your property until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you may think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a number of problems, including sliding. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to reach the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism getting worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need close your window and do a test fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is crucial to take action if wake up every morning to find mouldy walls and floors that are wet. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking may require removal before a new layer of caulk can be put on. It is crucial to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window repair. In more serious situations, you may need to think about replacing the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze, it may be hinges that are at the fault. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.

Like all mechanical parts hinges are prone to wear out over time. Changing a window hinge is essentially a very simple process but it can be easier to do if you have someone to assist in holding the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused due to opening the window in the wrong way or a faulty installation in the factory. Sending us a picture via our website will often solve the issue. We are more than happy to provide advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. First, the hinges due to wear and tear could become misaligned. This can cause a gap to form between the sash and the frame. They can be repaired by giving them good cleaning, but when they're beyond repair, it could be necessary to get them aligned or replaced. Second, the interlock can also become disaligned. It is located on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time, and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cozy!