• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that prevents loss of heat during winter and helps to keep your home cooler in the summer. The ability to have your double-glazed windows fixed when they need to is an excellent method to ensure they are operating effectively.

Over time, your double-glazed windows may suffer from problems like condensation and misting. This could cause your double glazed windows to be difficult to open or shut.

Broken Panes

A stray baseball, a flying pebble from your lawnmower, or even a storm that is heavy can break the double panes of your windows, leaving your home exposed to the elements. Although a window that is cracked can be difficult to repair however, you don't have to have it replaced entirely. The insulated glass between two panes of glass is in good condition and you can fix your double-paned window yourself.

First, you'll need to take any broken glass from the frame. This can be an unpleasant task, and you'll want to take care to prevent any glass shards from falling on the floor or sliding out of the frame. Make sure you wear work gloves to shield your hands from injury and a cloth to cover the area surrounding the broken glass to prevent further cuts or breakage. After taking out the broken glass, clean the frame of the window thoroughly, removing any sealant or other debris. Sand rough areas of the window frame to create a smooth surface to put in your new glass.

After cleaning the frame, you can apply another layer of glass to the area where you removed the broken pane. This is the best method to seal and protect your window, and will save you money by preventing water and drafts from entering the home. The next step is to choose the glazing material. There are a variety of options, including clear tape which is more durable than regular tape and will keep your window secure from further cracking, and glazing film that resembles clear plastic wrap. This type of wrap has the advantage that it can be painted to match your frame and will also block out the elements like ice and rain.

Whatever material you choose it's essential to press the glazier's points into that gap where the putty meets your frame. These will keep the glass in place, and aid in adhering to the frame. Hardware stores carry glazier's point ropes, which you can use onto the frame rabbets.

Condensation

Double glazing can be susceptible to condensation issues and if you encounter this issue, it is recommended to contact the company that installed the window. Many have warranties and guarantees that cover these issues. Condensation and fogging in the panes of glass is a clear indication that the seals between your windows are damaged and can only be repaired by an expert who will repair both panes.

It's a complicated procedure that requires special tools to remove and replace the window. A professional can handle this task and provide the tools. It is best to leave the job to an expert. These tools can be risky.

Wear safety gloves and glasses if you choose to do it yourself. You could be exposed to glass fragments flying around. It is also essential to remove all the putty and metal glazing points from the grooves that the new window will be. You will also want to brush the frame with wire, and then vacuum or wipe it clean with a damp cloth. Once the frame has dried it is time to order an additional piece of glass that is 1/8" shorter in both directions than the existing window. Check the glass's fit into the grooves.

You will need to apply a layer silicone caulk in the grooves of your frames to ensure your new glass is properly installed. After the silicone caulk is dried, you can smooth it out and make any necessary adjustments. The wood molding will then be reinstalled.

If the weather abruptly changes, double-glazed windows can be difficult to open and close. Extreme temperatures can cause frames to expand or shrink and, as a result, they can sag or stick. If this is the issue you could try wiping the frames down with water and lubricating the joints. However, it might be best to contact the company who installed your windows to help.

Misted

Misted Double Glazing is a upvc window repair problem that is caused by moisture getting trapped between the glass panes of double glazed windows. Double glazing is comprised of two glass panes that are separated by an insulating space, typically filled with argon gas for improved thermal efficiency. This results in an airtight seal that keeps warm indoor air in, and cold outdoor air out.

As time passes, the seal may break and moisture can begin to accumulate between the window panes, causing them to become cloudy. This occurs because the sun's heat causes the space between the upvc window repairs panes, which causes water to vapourize.

This is a normal occurrence but if it happens between the window panes, it can cause a problem as it can no longer control the temperature in the room, and allows the outside temperature to influence the indoor temperature. If you notice your double-glazed windows have become blurred, call the experts at Northfield Glass to investigate.

We can replace a single sealed unit, without the need to replace the entire window. This is much less disruptive than a full replacement. Our misty window repair involves removing the glass, cleaning it, and then replacing it with a new one to make a watertight seal again.

There are companies in the industry which claim to cut holes into your existing misted windows and inject chemicals into them that they say removes the fog & condensation, however, we do not recommend this method. This method is not only unattractive, but it could also damage the toughened glass and result in windows that do not fully perform the function it was intended to.

If you don't take care to fix the problem immediately it could cause mould, which could not only damage the window, but cause health risks for your family members. Moisture in the window can also lead to other problems with your property like damp or rot. In certain situations it is possible to replace the entire window.

Failed or Blown

Modern double-glazed windows feature two glass panes with an inert gas or air in between them. This improves their thermal efficiency by keeping heat in and cold out. Over time, the gas can become depressurized, causing many issues.

Condensation in between the panes is among the most frequent. It is not a sign of a window failing, but it could indicate that you need to reseal them. Condensation could be a sign your double glazing has broken in which case it should be replaced completely.

You should also look out for drafts coming through the double-glazed windows. It could be due to the seal being damaged or a damaged handle lock. It is important to fix this issue as soon as you can. A draft can cause you to pay more for heating. You can test the seals by rubbing around the edges of your window frame to determine whether you feel cold air.

Another indication that your window seals have failed is when you begin to notice water beads on the inside of your windows. This is a good indicator that you will need to re-seal your double glazed windows.

The frames of your windows are designed to move a little bit, as they need to do in order to keep the glass sheets in the right place. However, over time, this special packaging material may become compacted and this will crack the crucial seal. This will allow air to flow between the panes and reduce the energy efficiency of your window.

Double glazing that has blown seals is a sign of failure and should be fixed as soon as is possible. A blown seal stops your double glazing from performing its primary purpose, which is to keep cold air out and warm air in. Furthermore, a blow-off seal will let your home's moisture in, which can cause mold and other uncomfortable conditions. Contact a double glazing expert when you notice a blowing window seal. They can repair or replace the entire unit.