• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. It's discreet and doesn't require additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence of up to 20 presses long. This then authorizes the start-up of your vehicle.

Simple PIN Code Change Process

With the growing rate of vehicle theft, many owners are looking to improve their security. There are a myriad of aftermarket security devices available from tracking systems to immobilisers and alarms. Not all of them are equally effective at protecting your vehicle. A tracking system can help you locate your car if it is stolen however, it won't stop the crime. An immobiliser, on the contrary, does exactly what it says on the tin: it shuts down the engine of your car so that it is unable to be started. The autowatch ghost immobiliser fitting Ghost is one of the most advanced options available, making it nearly impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to begin. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without the button sequence. This option is particularly useful when you need to surrender your car for valet parking or maintenance since the immobiliser will still be activated and not disabled.

The Ghost is a truly unique and innovative device that is used in conjunction with the buttons in your vehicle rather than being a standalone unit. It's not just an effective deterrent to theft of your vehicle however, it can be used to secure any future vehicles you own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof tiny device

The Autowatch Ghost Immobiliser is an advanced security system that safeguards your car from key cloning and hacking. It also blocks ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices that are a popular method used by car thieves to get around immobilisers.

The advantage of using CAN data is that it operates in a silent manner when compared to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technology and cannot be identified by conventional diagnostic tools. The Autowatch ghost doesn't emit LED indications and uses the buttons on your vehicle such as steering wheel or centre console panels to create a unique, customizable disarm sequence. This sequence can be extended by 20 presses to provide additional security. The iPhone app allows only one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost also prevents car thieves from using an additional key or replacing the ECU to bypass the immobiliser to start the engine. The engine can only be started only if a valid PIN has been entered. It is able to be operated temporarily in valet or service mode (with parameters set, such as a 30mph speed limit) which means you can give your car to valet or service without entering an entry code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to block your car's system from going through its normal startup routine until you input an individual passcode. The system can be activated and deactivated by using your smartphone's app without the need for wires.

Standard factory immobilisers in automobiles function through an electronic transponder in the key that transmits a signal to the ECU. If the correct code is transmitted the car will begin however if the transponder is replaced by one from another vehicle the immobiliser won't recognize it. This enables the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the top of the line in vehicle security technology. It safeguards your car from hacking, key cloning and even key theft. Only by physically towing your car away could a thief take it away and not be able to drive the vehicle.

Ghost uses buttons on your vehicle, like the indicator stalk, steering wheel, and the door panels, to create unique PIN codes which must be entered in order to use your vehicle. This is done without additional hardware, like key fobs. It can take up to 20 presses. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if the system has been set up.

Ghost is harder to remove than car alarms, which require disarming with the buttons. This makes it a great complement to an GPS tracking device, which can be used to track your vehicle after it's been stolen.

Override of emergency PIN code

You don't have to look very long on social media sites to find stories or videos about cars that have been stolen using the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow them to start the car without your original keys.

The Ghost immobiliser has been specifically designed to prevent this and provide you with an extra layer of security to prevent your vehicle from being targeted by thieves. It creates an individual pin code push sequence using the buttons you have on the steering wheel, door panel and the centre console. This unique PIN is entered in conjunction with your original key fob to stop the engine from beginning. The unique override pin is found on a black plastic card which you will receive following your installation. It is easy to remember because there aren't any LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected by diagnostic software that can determine what type of security systems you have installed. This makes it a fantastic alternative to a tracker.

Unlike other security systems, which use a relay in engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down a vehicle completely, by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems, however this must be specified before installing the device. They are also fully service/valet mode-compatible and a great alternative to a tracker if you are having your car in for repair at the dealers.

Service/Valet mode

In recent times, there has seen an increase in the number of cars being stolen without the owners keys. With the ease of access to key cloning equipment & door lock pick sets it is now easier than ever for thieves to take your pride and joy. We have created the autowatch ghost immobiliser install installers near Me (calm-romaine-fhcxc8.mystrikingly.com) Ghost Immobiliser to combat this. It blocks your car from being driven, even if your keys have been cloned.

It communicates directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't use radio frequencies or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also stops you from introducing an ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden within your car and can be accessible via buttons on your steering wheel, centre console and door panels. Before you can begin your car, you need to enter a unique, changeable PIN number that is up to 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that is being created. It will stop your vehicle from being driven or started in the event that you do not enter a PIN code before entering. If the device is armed and you attempt to drive away, it will display a warning on your dash which will flash on a regular basis for approximately 300m. If you type in your PIN code at this point it will disarm the anti-hijack device and your car will continue to drive just as normal. If you do not enter your PIN code at this time the indication will continue to flash and will require a new PIN code for every attempt to start your vehicle.