• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement Upvc Window Handles

Most replacement upvc windows handles include everything you need. However, if your old handle was fixed by screws or pins, they will need to removed. Remove the'snap-in' covers at the base of the handle.

The next step is to identify what type of window lock and handle you're replacing. This is vital!

Espag

Espag handles are a set of multipoint locks that are fitted to casement window types like uPVC or wooden double glazing. The handle has a 7mm square shaft that fits into an internal gearbox that is mounted on the uPVC window. When the handle is turned, it will activate a series of locks around the perimeter of the window. Espag handles, also referred to as shootbolts, give more security than the single point lock that is found on older window frames.

They are available in a range of different options such as inline and cranked designs that can be used in left or right-hand operation. You can also find a range of ergonomically designed handles that are designed to enhance the feeling of the handle and the way it appears on your windows.

If you are looking to replace your current uPVC window handle with an espag handle, you will need to identify the size of the spindle that is fitted and measure this from the base of the handle in order to purchase the correct replacement. This measurement, referred to as the step height, will help you choose the best uPVC window handle for your home.

You may need to remove any screw covers that protect the screws that hold the handle in place and if this is the case, use a screwdriver to remove these or pliers to remove the pins that hold the handle. Once you have done this then you must remove the handle from the frame by taking off the screws or pins that secure the spindle and then taking it away from the window.

When you have the handle removed, you'll be capable of accessing the locking mechanism inside the frame of the window. You can then remove the wedge block cockspur that is fitted adjacent to the handle, allowing the window to open. The new uPVC handles you purchased should be able slide over the cockspur block and then into the handle spindle to allow the window to open again. It is recommended to replace the wedge block cockspur with a new one whenever you replace your uPVC handle to ensure that it is properly secured.

Cockspur

Cockspur handles are generally found on older uPVC and aluminium windows. The handle turns and closes on a plastic wedge shaped receiver catch (not to be confused with window latches made of timber that are also covered in this section). The handles are available in lockable and nonlockable models. They come in a range of different nose heights to fit the frame.

The handle is secured with a small triangle-shaped spur (spur) that is attached to the frame. They are usually one-way handles, however a locking deadlock cylinder is a possibility to add security.

The replacement cockspur handles are easy to put in. All you need is the correct backset and a new set (supplied). The backset is measured from the baseplate to the underside of the nose of the handle. Aluminium window frames are usually 9mm wide, whereas UPVC is 21mm wide. There are a myriad of variations though so it is important to take a measurement before purchasing the handle (see video below for how).

This type of window handle can be changed by simply removing the existing handle and removing the spindle, or in certain instances, the entire handle assembly. The new handle is fixed with a pair of pozidrivs screws. The pozidriv screws come in either a brass or zinc finish to match the existing hardware, and there is the option of a self-locking version.

This cockspur handle can be simple to install and is ideal to replace or repair old uPVC Windows. They are an universal design, making them suitable for all backsets and profiles. Each handle has three packers, each with a different thickness. They are installed on the underside of handles and can be stacked to create backsets as small as 9-13mm or as big as 21mm. They are available in left and right handed models and are available with lockable or nonlockable models with a variety of nose heights.

Tilt and Turn

Tilt and turn windows are a coveted European window style that has been around for decades in Europe however, it is only getting noticed stateside. They combine the benefits cost of A window replacement three window styles into one: tilt, pivot and in-swing. This makes them perfect for older homes since they can be used to provide more ventilation than traditional window types.

When tilt and turn windows are closed, they lock like any other fixed window. By turning the handle either 90° or 180° depending on the type of tilt-and turn window the sash will slide inwards, and the window will turn inwards to allow air to circulate. This is a great way to let air circulate without opening an enormous, potentially dangerous window.

The sash is also able to be fully opened by turning the handle 90@ or 180@. This allows for full air circulation which is especially beneficial in rooms with a lot of draft or where smoke or other smells can accumulate. It also makes cleaning the outside of the glass replacement for windows near me much simpler since it can be done from inside the home - a job that usually requires precarious ladders.

Tilt and turn windows are extremely secure. They are very difficult to open if they are locked in the closed position. They also have double glazed replacement windows seals that stop rainwater from entering your home while in the tilted position, or in swing. This feature is particularly beneficial for older homes where intruders tend to target windows which can be opened by the side hinges.

Spade

There are several types of window handles that can be fitted to double glazed windows made of Upvc. There are two main types of handles: Cockspur and Espag. Other choices include tilt and turn handles as well as spade or blade handles, monkey tail handles, and various other types. The type of handle that you select will depend on your preferences and the type of windows you have.

To choose the right replacement upvc window handle, it is important to know how your current handle is fixed to the frame. This is called handing and is a vital piece of information, especially when buying online as some handle variations don't fit all windows. Some cockspur handles, for example, are angled while others are straight, and can turn either left or right. You will also need to know what the spindle length is that is the distance from the base of the handle to the tip of the handle.

Another crucial aspect of selecting the right handle is knowing whether your windows need a restrictor or not. These are usually used in high rise flats or commercial properties, but they're not required for the majority of homes. Also, take into consideration step height, which is the distance from the bottom of the screw plate to the top of the handle.

The word spade is derived from Old English spadu, spaedu or spada. It has been translated into a variety of languages including German spaten and Low German spathen. During the Harlem Renaissance of the 1920s in New York City the word spade was used to mock black people. Spade has since risen to prominence in pop culture and is now a well-known symbol of African American heritage and pride.

When replacing a Cadenza handle, it's essential that you choose the right size. The handles are available in both angled and straight versions which differ by a few millimetres. The handle head may change between a D and T shape, or have no handles at all.