• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Many customers agree that upvc replacement window pane (Bravejournal published a blog post) handles are easy-to-install and feel comfortable. But it's important to understand that the type of handle you select should be appropriate for your window.

The height of the step is the most crucial factor. This is the distance between the handle and the base or frame. Other considerations include lockable designs and mechanisms.

replacement window seals parts

You can purchase a variety of replacement sash windows cost handles made of upvc. They are available in a variety of styles and colors, so there's sure to be something to suit your windows. It's easy to impulse buy especially if the handle is damaged, so it's a good idea to look over the details prior to committing to purchasing a new one. The first thing to think about is the type of upvc handle you have now and what the difference between kinds is. The table below lists the most common handles to help you choose the one that is suitable for your upvc windows.

Espag handles are the most commonly used and are found on most modern double-glazed windows. They are typically attached to the frame with two screws that are screwed into the frame from both sides, above and below.

The spindle bar at the back may be of different sizes, and will determine whether they are left-handed or right-handed. It is important to determine the measurements of the handle you currently have to ensure that you get the correct replacement.

The arm is fixed to the frame using two bolts, much like the Espag handle. However, the handle has a lower projection, so that it doesn't damage your blinds. This is a good option for blinds on your windows made of upvc and you want to make sure the handle blends with them.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that rests on the window frame. This kind of handle is available on some older wooden and Upvc windows.

On casement windows the tilt and turn handles are operated by turning the handle or pressing the top of the window. This opens the window from the inside, allowing you to clean outside without needing to step to the ladder or step over the garden fence. They are also a great option for people with restricted mobility. They can be a great way to improve security and accessibility in the home.

Tips and tricks

There are many different kinds of uPVC window handles, and a lot of people will need to replace them at some time. It's important to have some tips and tricks to help you make the task easier.

Examine the type of handle that is at your home. Depending on the type of handle and locking mechanism, it may be necessary for you to replace the lock and handle. If the roller cams or shoot bolts (espags) are blocked or getting stuck, you'll need to replace them, along with the handle.

Thankfully, most uPVC handles are very similar and conform to industry standards for sizing, which makes replacing them a fairly easy process. The first step is to remove the screw covers from the handles, usually pozi-drive screws. Once they are removed, you can then remove the handle.

When you have the handle broken it is recommended to make note of how much of the spindle extends from the base of the handle. This will allow you to determine the length of the spindle for an alternative handle. Simply take note of the length the square peg extends out of the bottom of handle.

This is particularly important for inline uPVC window handles since they will always be straight and can only open from left or right, and they won't operate in the middle. If you're unsure of the kind of handle you have at home, it could be a good idea to take a handle from a neighbour's home and observe the way it works to get an idea.

Another excellent method to figure out what the hand of the uPVC window handle is to look at how the handle turns when operating. Handles can be turned clockwise or counter-clockwise. If you're unsure it's possible to have someone else open the window with the handle, and work out how it operates in that way.

Take a measurement of the spindle

Selecting the right replacement handle for your windows can be a bit difficult since not all handles are the same size. The spindle is what is the mechanism that locks the window and it is essential that when fitting a new handle it is measured to the length of the spindle accurately to ensure it fits. There are many different kinds of uPVC window handles that operate in different ways so it is vital that you know what type of handle you are using and the type of locking system that you are using.

The spindle on the espag handle extends out from the handle's rear, and is connected to the lock gearbox within the window frame. When you turn the handle, it then turns the lock in the gearbox to open the window. They are used on uPVC windows with casement and can be locked using keys for extra security.

Cockspur handles have an "nose" which closes over the striker block in a wedge shape on the frame and they are usually found on older double-glazed uPVC windows. They are also simple and can be locked using keys. They can be a little more difficult to find replacements for since they are not as common as the espagnolette handle.

If you own a tilt-and-turn uPVC, you will require a new handle that has a different locking mechanism. This will be able to tilt the glass window replacement open but also turn it inwards and outwards to fully open it. You will need to ensure that the handle you pick has a spindle size at least 55mm, or it will not be able to reach into the frame of the window.

The same procedure can be used to remove and replace the uPVC handle. However, you'll have to be careful when unscrewing it. You may need to open the window a little larger than usual to ensure you reach both screws that are fixing it to the frame. Once you have fitted your new uPVC handle and checked that it is in the proper position, then you can tighten the screw covers and test the lock to confirm that it functions correctly.

Fit the new handle

Once you have the correct handle replacement it is easy to screw in the right place. It will require a screwdriver, and an electric one may be easier. When screwing, it is crucial not to over tighten the screws because this can cause the handle to warp or crack.

Inserting the spindle is the second important step to attach the new handle. The spindle is a part that is inserted into the handle to control the locking mechanism inside the window. It is important that the part is fitted correctly to permit the window to open and shut securely.

There are a variety of types of uPVC handles. There are a variety of uPVC window and door replacement handles.

Espagnolette Handles are inline handles that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles - these are similar to the inline handle however they feature a curved design that is useful for windows that are difficult to reach.

Tilt and turn handles These are used to control the opening and closing mechanisms on tilt and turn. They also move windows.

The majority of uPVC window frames are equipped with these. In the UK, they are commonly known as "Bay Windows".

If your uPVC window handle is broken, it can be extremely frustrating. There is no need to replace the entire uPVC window due to a broken window handle. There are a number of easy steps that can be taken to fix and replace a broken uPVC window handle.

Fixing your broken window handle swiftly by identifying the model and determining the spindle. It is important to take your time and prioritise security when working with windows or tools, but this is a relatively simple task. It could mean the difference between a safe and secure home, or a window that can be easily opened. If you have any questions or would like to speak with a professional regarding replacing your window handle, contact Bridgewater glass window replacement. Our team is skilled and knowledgeable to help you with any issue.