• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a damaged or broken window handle is a relatively simple process and, with the right tools, it can be done quite quickly. However, it is essential to know your type of handle and the spindle's length prior to purchasing an alternative.

Older uPVC window handles have a spur that protrudes and locks on the wedge striker. These can be left- or right-handed, and must be compatible when replaced.

What type of lock and handle do I have?

There are many different types of upvc window handles and locks, each with its particular advantages and uses. The type of handle you have will determine the ease to open your windows and if the locking mechanism works according to the plan. As time passes and with regular usage, the window handles made of upvc may become damaged or worn out, making them less secure and efficient. In some instances, they could even fall completely off. It is essential to fix your window handles made of upvc immediately if you see them falling off. This will help stop potential burglaries and protect your home from burglary.

It is a good thing that replacing your window handles made of upvc is a simple task that can be completed by almost anyone. You'll require a few basic tools, but with right knowledge, it is simple and should take only a couple of minutes. To get started you'll need to identify the type of lock and handle you have on your window made of upvc to help you to find the ideal replacement.

Inline Espagnolette Handles

They are typically found on the sides of the window. They are flat and have an opening that engages the locking mechanism of the window frame. Inline upvc handles come with a spindle running through the middle of the handle and into the window frame in order to control the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles have a single screw that secures the handle to the window frame and are not as secure as other types of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles in that they can be turned to open the window and then lowered to the window to let air circulate. Generally, they feature a 7mm spindle on the back of the handle. They are available in both left and right-handed versions.

When buying replacement window panes upvc handles, it is important to measure the spindle's length because not all handles are identical in size. To test the length of your upvc handle simply drop something into the middle of the hole and measure how far down it goes before it comes into contact with an obstruction. This is the length of the spindle that will fit in your window.

What is spindles?

uPVC window handles work similar like doors, turning the handle to operate a latch inside the frame. The latch opens the window, so that it can be shut and opened. But, at times, the handles may become damaged, especially when they are used frequently or exposed to harsh weather conditions. You may need to replace the handles on your uPVC window if they are not able to operate it properly.

There are a variety of uPVC handles that are available, comprising Espag, Cockspur and Spaded handles. They are designed to fit in the uPVC frames in different ways and each handle type has a particular spindle that is used to lock the mechanism into the window. This is why it is crucial to know what type of handle you have on your uPVC window so you can get the correct replacement window near me for it.

You can find out what kind of uPVC handle you have by looking at the base section of the handle. A snap-in cover is over the screw that holds the base of the handle in position. When you remove this cover, you will be able observe the second screw that holds the handle base in position. Once both screws are removed you should be in a position to pull the handle away from the uPVC window.

Once you have removed the uPVC window handle, you have to carefully unscrew the spindle that was previously attached to the locking mechanism. Be sure to note the length of the spindle since you'll need to ensure that you buy one that is the same length as your original handle and locking mechanism.

The primary issue with window handle problems with uPVC is that the spindle becomes worn out and cannot longer function properly with the locking mechanism. This could be due to corrosion, damage due to continuous use, or even an unreliable locking mechanism. If this happens, you'll have to replace both the window cost replacement handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I take off my old handle?

Over time and through everyday use, double glazed window replacement handles may become damaged or broken, and if this happens it is important to repair them as soon as you can to ensure the safety of your home. It is good to know that replacing a damaged or worn handle is a relatively easy task that can be completed in just over a minute and doesn't require any specialized tools.

The first step in removing the handle that was previously used is to remove the screw situated on the top of the handle base. Once the screw is removed, the handle can be removed from the base section. There will be another screw located at the bottom of the handle's base, and it is able to be removed as well. When both screws are removed the handle can be removed completely from the base of the window.

Once the old handle has been removed, grab the new handle and align the fixing holes with the holes present in the window frame. There might be a small cap or sticker on the new handle, so take off the caps if needed, and then screw the handle into the frame. Once the handle is in place it is crucial to verify that it works by turning the handle and ensuring that the lock mechanism is activated.

Espag handles feature spindles that protrude out of the handle and slot into the multipoint locking mechanism on the frame of the window. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom crossmember of the bar.

Once you have the new handle in place, insert the spindle inside the lock in the window and then tighten it down. Replace the snap-in cover and screw cap (if necessary) after the handle has been firmly fixed. The handle is now ready for use to use, so try opening and closing the window a few times to make sure that it works well and securely.

How do I put in the new handle?

Changing your uPVC window handle isn't a big deal and the process is simple. You only need a screwdriver, and a bit of patience. The first thing to do is to ensure that the handle you have previously used is in the unlocked position and then remove any screws that are visible. you can replace them with screw caps if needed. After removing the handle, you'll need to record the length of spindle that extends from the back. This is crucial since it will determine the kind of handle you'll need to purchase.

Espagnolette handles are the most common type of handle used on uPVC windows. They have a spindle that is inserted into the handle and acts as a locking mechanism within the window frame. Once the handle is turned it opens the latch on the window and allows it to open. In regular use and over time, handles made of espagnolette can be damaged.

Cadenza handles are a second type cost of windows replacement uPVC window handle that is commonly used on tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism inside the window. They are more secure than an espagnolette handles since they only open from the inside. They can be replaced with the same procedure as espagnolette handles but you must ensure that the new handle has a curved blade instead of flat ones.

Once you have decided on the right handle to purchase then you can align the new handle with the screw holes and then screw it into place. Then, put the screw covers on and test your new handle. You can accomplish this by moving the handle between the locked position to the unlocked a few time. If you have any issues, it could be worth contacting a specialist to see if they are able to help resolve the problem. They can advise you on how to solve the issue in a quick and efficient way.