• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers to assist the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth prior Upvc Window Repairs to you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor, where they could be trampled.

It's a great idea to seal the gap after the glass is removed. This will stop drafts and UPVC Window Repairs water from entering your property until a professional arrives to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is significant, you may want to use security screens that has windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a number of problems, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows to get at the frame. Then, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have moved your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loose their elasticity. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. It's fairly simple to fix a loose uPVC handle. The first step is to close the window and then perform a test fit. The corners of the sash need to be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. Again this can easily be repaired by a uPVC window doctor expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with ease it could be hinges at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's very simple to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrow on each hinge, this shows which way the window should open.

The problem can be caused either by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also essential to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges may also become disaligned as a result of wear, which can cause an opening between the frame and sash. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it might be necessary to have them aligned or replaced. The interlock may be disaligned. It is located on the hinge side and could require to be cleaned. In certain instances it is possible to replace the hinges.

The seals may wear out or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as possible.