• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Window sashes must be inspected regularly for signs of mold, mildew and damage. By catching problems before they become serious, you can save money on repairs in the future.

The sash is an inside frame that moves up and down vertically in windows that are open. This article will teach you how to make several simple sash repairs.

Weather Stripping

Wooden window sashes can give an elegant look to your home. They are also durable and can last many years when they are maintained properly. However, they can be damaged or deteriorate over time due to exposure to elements and normal wear and wear and tear. Sash repair specialists can restore windows back to their original condition and maintain their beauty longer than replacement windows.

The first step in sash window repairs is addressing weather stripping, which can be found on both the sash as well as the frame. It can cause drafts if damaged or is loose. To fix it, start by determining your window's brand and glass manufacturer date (etched in the corner of the glass or on the aluminum spacer between panes). Then, remove the sash and mark its width and height so that you can locate the appropriate weather stripping replacement to match.

Next, remove the sash and set it on a surface so that you can reach all four sides. If the sash is double-hung, you'll also need to take off the weights and their ropes that should have fallen into the pocket of the jamb liner. After you've removed the sash and the weights, use a utility knife to cut away the weather stripping that was formerly in place at the corners. Then, take it off by hand or with a putty knife.

When the sash is clean, you can replace the parting stops. These are long pieces wood that are used to separate the two sashes. Pam prefers to use the standard 1/2-inch by 3/4-inch window trimmings from the lumberyard. However, you can also use for a scrap piece of lumber.

After removing the parting stop and trimming it to length and then apply a thin layer of glazing compound on the bottom of the sash. Smooth the compound with your putty tool and allow it to dry for at least one day. After it has fully dried then apply a top coat of acrylic latex paint. This coating will protect the putty and give your sash a fresh appearance.

Sash Hardware

The hardware that supports the window sashes can wear out with time and use. This could result in windows or doors that is difficult to open or close. It's important to know that replacing or repairing this hardware is often easy and affordable. If you're having difficulty opening the sash, spray some grease into the jamb channel. Then, slide the sash up and open to see if this resolves the issue. If not, the problem is likely with the balance of the sash and you'll have to take off the sash in order to access this hardware.

The ideal situation is for window sashes to swing open and closed with very little effort, but this is a difficult task when the weights wear out or if the sash's meeting rail isn't properly coated. This issue can be due to various reasons that include the lack of maintenance or an unmatched weight rating.

If the hinge arms of a window repairs near me are starting to sag, this can cause the sash to slide and eventually strike the frame in the corner directly opposite the hinge arm (Photo 1). To fix this issue, first make sure the sash fits squarely in the opening of the frame and then remove it from the window repair. If the sash was screwed onto the hinge arm, take it off the hinge and replace it. (Photo 2). Then, you can install the new sash (Photo 3).

Due to hinges that are sagging, and a general deficiency in energy efficiency, windows that are old, especially those in older homes, can be difficult to open or close. In many cases, a few simple fixes can make these windows operate smoothly once more and help homeowners save money on energy bills.

It is essential to have the tools you require before you start. Begin by marking the position of the hinge channel on the frame using a pencil (Photo 1). This will allow you to get the channel back into place correctly when you're finished. Then, remove the sash, and then remove the hardware including the beads that separate (Photo 2) and the chains or cords which hold it in place. Soften any putty that has been hardened with an electric heat gun set to medium and fitted with an shield to block the nozzle. Remove the old sash and keep it in a bag labeled.

Sash Weights

Sash weights can be replaced to improve the operation of your window sash, and also reduce the cost of energy. Sash weights are heavy lead or iron cylinders enclosed inside a hidden compartment and connected to the movable the sash with rope. These weights function as counterbalances, allowing you to open and shut the window without the need for mechanical or electrical devices. The sash weights are usually disregarded or disabled by homeowners, and are turned into scrap when they fail. Consequently you may have to find replacements.

A weight in a sash that has fallen out of the cavity is difficult to retrieve, so you will want to locate a new one that fits properly. You will also require an additional piece of string, a length sash cord, and a few sash pulleys to tie the new sash weights to the sash cord.

Mortise and Tenon joints can be used to join old wood windows. Hammers and pins can be used to remove the wood pegs holding the parts together. The majority of these pegs have a large diameter on one side and a smaller diameter on the other side, so it is important to remove the smaller-diameter sides first. Later sashes made use of glue instead of pins. They can be cut by using a knife or mallet.

After the sash is removed and removed, you can take off the stopper on the sash and get access to the weight pocket. Usually, this is done through an opening in the bottom of each jamb. This hole is covered with the wooden panel which can be removed to reveal the interior workings.

After you have the sash stopped and the access panel removed, you'll be able to remove the old sash weight and replace it with new. Weigh the sash first, as the weights you've got may not be of the right size. Once the new weight is installed, run the string through the sash pulling mechanism. Then, nail the string to your boxed frame. Leave a few inches at the top of the string for future adjustments.

Sash Cords

Most old double-hung windows have a cord or chain connected to the weights that supports and keeps the sashes balanced within the jamb. Over time, these chains can get damaged and render it impossible to raise windows. A new sash cable will give you the ability to raise and lower the sash, and ensure it stays in place when opened.

The first step to replace sash cords is to locate and take out the access panels located in the jambs. They are typically screwed or nailed into and need to be removed. It is possible to remove them using an axe or hammer, however, it is best to lay out dust sheets prior to starting any work.

Once the access panel is removed, you can begin working on the sash. Make the small parting beads (also called "tie rails") out of their grooves using a chisel or flat bar. They are typically wedged into or nailed but can be removed, window repairs so it's worth taking your time. If the sash is still in place, break the mortise-and tenon joints using a hammer or screwdriver and then remove each wood peg. It should now be possible to move the sash around freely, though it might require oil if it feels stiff.

Measure the length of the sash chain or sash cord required to reach the sash slot on the bottom from the pulley at the top of the jamb. Cut the cord/chain and then fix it as described in the previous step. You can use a hammer, nails or screws. However nails are less likely to cause damage.

It's best to leave the original weights in place unless you've purchased a kit that will replace the counterbalance. They're not expensive and simple to install if you purchase them from salvage shops for architectural use. Depending on the size of your window one or two sash weights might be required to keep it open.