• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

replacement window handle UPVC Door Handles

Whether you're replacing your handles or want to add a bit of extra security you can choose the perfect handle for your door. These upvc handle are easy to install and have the 92mm minimum central distance for multipoint locks.

The most important measurements to be considered are backplate fixing centres as well as key hole dimensions and levers. Check these carefully against your existing measurements prior to placing an order.

Lever/Pad

Lever pad door handles are made up of the lever handle on one side and a paddle shaped handle on the other. These are designed to work with key wind locks although they can also be used to multipoint split spindle door locks (though you will need an additional dual spindle lock case).

Our range of upvc handle lever pads are available in a wide range of finishes. These will be displayed in the drop-down list after you have selected the perfect handle for your doors. Some styles of handles are not available in all finishes. You should always examine the technical drawing and dimensions for the item that you want to ensure that you get the right size and fit.

When choosing a new set of lever pad door handles made of upvc, it is important to ensure that they match the PZ (distance between the spindle of the handle and the center of the hole for the cylinder) of your current multipoint door locks, since they have to be in line to ensure that the doors remain locked, either from the inside or outside. Our handles are designed to fit most conventional cylinders, but it is important to double-check before ordering.

You'll need to remove your handles that you have already installed and then dismantle the lock case if you are upgrading to dual spindle levers for your handle because this will require a split inline cylinder. You can purchase these separately. We have included a technical illustration in the images of each product.

After you have removed the screws holding your existing door handle it is an ideal idea to loosen them, and then inspect the mechanism to see what condition it is in. If the screws aren't tight enough, you may need to loosen them even more. Then you can remove the spindle from the door handle and replace it with your new Upvc handle. It is essential to ensure that the handle is in the correct position prior to installing it. You can do this by placing your finger between the frame of the door, and the handle to ensure that it is level.

Lever/Lever

The lever handles on doors are used to operate a multi-point lock using a Euro cylinder. They can be found on a variety of double upvc doors as well as some wooden and aluminium doors. They are available in two forms, having the lever inside and a paddle on the outside. Sprung - These have a spring cassette installed within the backplate that helps to bring the brompton carry handle lever into the horizontal position. Non-sprung: These do NOT include a mechanism that can spring the handle lever to a horizontal angle.

To fix a door handle that is sagging you must find the hole for access to the detent or pin, which is usually a small round or rectangle with a protruding hole located on one side of the handle base plate. Once located you can loosen the set screw using the help of a screwdriver, and then remove it to allow the lever, allowing it to return to its horizontal position.

When the handle is in a horizontal orientation, you can put the screws back in place and tighten them to make sure the handle remains secured to the base plate. You may want to apply a threadlocking solution to the threads of screws to improve grip and prevent the threads from becoming loose over time.

There are a variety of reasons why lever door handles slide. The most common cause is that the fixings have been over tightened, and are putting pressure on the bearings that are and causing it to pull against the door face. It could also be that the levers have not been operated at a right angle, which stretches the latch mechanism and prevents it from fully springing into operation.

Another common cause is that the sprung lever is not functioning properly and this is typically due to the spring not being in the proper position within the backplate. The easiest way to test this is to operate the handle to see if it returns to its horizontal position.

If your door handles are loose, it is crucial to find the issue fast, as this can lead to excessive wear on the screws and eventually to the handle falling off of the base plate. It is also a good idea to tighten all screws that are loose on a regular basis, as this will help to prevent them from becoming loose.

Lever/Snib

These upvc handles are also called "Snib handle sets" and have an snib lock button located at the top of the door lever. If you don't have a dummy lock device then you can use this feature to secure the door. These handles are fitted with the Fullex lock 68PZ. (68mm between the spindle and lock centre). We also have a range of other 68PZ door handles from manufacturers like Ferco and Fab & Fix.

You can upgrade your home by changing the door handles, whether you are replacing your existing handles or installing new ones on doors that you have built. There are a variety of upvc door handle available with traditional levers on backplate, straight or curving short latch and knob handles that resemble dummy knobs for multi point locks that are perfect for French doors.

Rose door handles are circular or oval-shaped versions of lever-on-backplate handles. These kinds of door handles have the knob or lever on a backplate, which sits behind the knob or lever and is often referred to as a rosette, although certain back plates can be detached to be concealed for fixing.

The handles for patio doors are available in a variety of finishes including coloured and chrome finishes to complement your door and other hardware such as knobs, hinges and bolts. Some handles are equipped with a an grub screw that can be used to connect the knob or lever securely to the spindle. Other handles come with bathroom spindles that can be used to operate bathroom locks. They feature a thumbturn turn as well as a release mechanism, ideal for bathroom doors.

Mortise

The tubular latch is the most likely to be the cause when your victorian scroll door handles handle made of uPVC is stuck open. This can be caused by a number of things, but the most common is an absence of lubrication within the latch plate. This can be fixed quite easily by opening the door and spraying lubricant on the lock and handle. Alternatively, it could be that the latch plate has been dislodged from the backplate. This is a more complex issue that requires the help of an expert.

A multipoint door handle is a great solution to the problem of a stuck door handle. These handles are mounted on the faceplate of the door and are operated by an actuated thumb turn knob or key that activates an electronic cam that locks the deadbolt. The handles are available in a variety of sizes that will fit different types of uPVC doors. They also come with a variety of attractive finishes that match the hardware you already have. These handles are available via the internet or at an authorized locksmith in your area. They are easy to install and come with clear directions.

You will have to know your PZ cylinder's size to select the appropriate Replacement Upvc Door Handle handle set. This is the measurement in millimetres between the inside edge of the frame of the door and the centre of the hole in the handle. You'll also require the type of lock on your door, whether it is a mortise or hook lock. The easiest way to find the correct handles once you have the measurements is to use the brand filter on the website. This will help narrow down your options and then you can select the right size.

A typical set of handles includes a handle unit with two screws of various lengths, drill guides, and instructions for installation. The smarter models, like the Igloohome Smart Mortise 2+, include an entire mortice lock that has a built-in keypad. These are more complex models and are ideal for professionals who install them or competent DIYers. Some handle sets include various accessories, including weather strips that can be used to enhance appearance of the door.