• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and cosy form of heat with no harmful gases or soot. They are easy to install as an electric fire.

The BARDA contract will support the development of the BioFire emerging CoV panel, which is a nucleic acid Amplification test that will be used in conjunction with BioFire filmArray Systems for detection of human acoronaviruses from nasopharyngeal oropharyngeal samples as well as saliva samples.

Eco-friendly

Bioethanol is an eco-friendly alternative for gas or wood. The fuel is made from plant by-products and uses an organic process to convert sugars into alcohol. It is a better choice over other fireplaces as it produces no harmful emissions, and has a lower carbon footprint. Bioethanol is a healthier alternative to other types of fires since it doesn't create smoke or soot. It also does not require a flue, and can therefore be set up anywhere in your home or in your garden.

Multi-drug resistant bacteria (MDR) are among today's most serious health threats. Fortunately, new testing methods can help identify MDR bacteria and other infections early to stop further complications. One test that can help is the BioFire FilmArray multiplex PCR system. This test uses an approach based on symptoms to identify pathogens that could cause sepsis. The results are available within an hour so that doctors can begin treatment immediately.

The Molecular PCR process increases DNA and RNA molecules to millions or billions of copies. This permits the analysis of small quantities of body fluids or tissues to determine if certain genetic sequences are present. It is an excellent instrument for lab professionals and can help them diagnose serious diseases in a cost-effective and efficient way. The BioFire film array PCR system is an innovative instrument for diagnosing infectious diseases. It can be utilized in various environments, including hospitals and laboratories.

If you are undergoing tests for respiratory problems, you can apply a swab of alcohol to your nose before sending it to the lab. BioFire’s system allows clinicians to react quickly and with a short turnaround time. This means that patients will experience better outcomes and will not have to wait for results.

The Chanouf Farm Biofire company has developed an agroforestry recycling system which makes use of olive and pear waste to produce organic charcoal and biomass power. The products are offered to the general public to replace traditional coal briquettes and charcoal with green alternatives. These bio-waste products are suitable to be burned in a Kachelofen fire which generates radiant heat and is a more sustainable alternative to electric or gas fires.

Clean burning

When you make use of a bio fire you aren't just saving energy, you're also helping the environment by using a renewable fuel source. Bioethanol combustion does not produce harmful gases, such as carbon dioxide. Instead, it releases heat and water vapour. This makes it a safer and cleaner option for indoor use.

Ethanol is made from the fermentation of sugars in plants and is classified as a renewable fuel source. It can be produced quickly and won't run out as fossil fuels like oil and coal. Bioethanol helps reduce dependence on foreign imports and increases the chance of shortages.

Bio-fires can be set up easily, and can be placed in existing fireplace openings, or as a standalone unit. This makes them an alternative to wood and gas fires. They are also a great choice for offices and homes that do not have chimneys or flues.

When a bio ethanal fire-fire is lit, a specific media is built into the burner that absorbs the liquid ethanol fuel, making it ready to be used for combustion. The ethanol fuel is ignited in the flames, and the vapors are released into the atmosphere via the vent. This gives the flames a more natural look and a captivating beauty that cannot be duplicated by wood or gas fires.

bio ethanol fires uk-fires benefit from not requiring a vent or flue to replenish oxygen used during combustion. They don't emit the carbon monoxide which is released into the air by open fronted gas fireplaces.

The BioFire Respiratory panel makes use of multiplex PCR to simultaneously test for respiratory pathogens. This takes about an hour. This allows doctors detect and determine the presence of respiratory illness quicker than traditional laboratory tests, which require visits to patients. This means less time and more money for both the patient and the health system.

Safe indoors

Bio-fires can be used indoors much safer than real fires, since they don't emit smoke or ash, nor carcinogenic fumes. The bio-fires don't produce carbon monoxide, which can be deadly if inhaled. However bio-ethanol fuel can be flammable and you must be cautious when handling your burner as well as refueling it. It should be filled only after the burner has been shut off and the fire is cool, and any spills should be cleaned immediately.

The diagnostics offered by the company's FilmArray systems - BioFire 2.0 and BioFire Torch--are simple to use and run eight different commercially available US Food and Drug Administration cleared diagnostic panels and three additional panels that have been authorized for use in emergency situations, and six environmental test panels. These tests include a brand new respiratory panel that was designed to quickly detect and discriminate between respiratory illnesses, including COVID-19 and emerging coronaviruses.

The Biomedical Advance Research and Development Initiative, a part of the US Department of Defense Strategic Access Program has granted the COVID-19 panel with a grant. The COVID-19 test is an antigen-based one that allows clinicians to differentiate between symptoms caused by COVID-19 and other respiratory illnesses with a similar degree of accuracy as the current rapid antigen tests being used.

The company is also developing an SARS-CoV-2 test to be used in its Respiratory Panel 2.1. This multiplexed nucleic acids amplifying test will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens in nasopharyngeal and saliva samples in less than an hours. The assay is being developed on an accelerated timeframe and submission to FDA for EUA and 510(k) clearance is expected in the third quarter of 2020.

Bio-ethanol flame effect fires are safe to use, but should be kept clear of things that can ignite, like curtains, pillows and blankets. They should not be placed near anything that may catch fire and you should keep flammable materials at least 10 feet away from them. The bioethanol fires near me (sailorroast3.bravejournal.net wrote in a blog post) fuel should be stored in a location that is dry and secure, where pets or children cannot easily access it.

Simple to use

A bioethanol fireplace bioethanol is simple to operate and doesn't have a flue to be concerned about. You only need a place to store it as well as fuel. After you've filled the burner with fuel, you can light it. This will produce the appearance of a fire that is like an actual fire. Once the flame is lit it will heat up the room without much smoke. It will also generate plenty of heat, just like a wood-burning fire would. They are also simple to maintain and do not require any servicing. A quick wipe down is all they require.

In contrast to other tests that are quick that are available, the BioFire RP2.1-EZ test employs an syndromic approach to detect the most common signs of infection and return results in about 45 minutes. The test is for patients with symptoms of upper respiratory tract and has a sensitivity rate of 98 percent. The test can detect 19 viruses and 3 bacteria in a single sample which makes it an excellent option for the treatment of patients.

The BioFire platform integrates multiplex testing, sample preparation and result reporting in one integrated platform. This helps laboratories to streamline their workflow and eliminates the necessity for a sequential approach that requires a separate and send-out tests. This could lead to improved outcomes for patients by allowing the correct test to be used the first time, and by removing the need for expensive tests that are based on a culture. The BioFire system can identify pathogens at a individual level and also their antimicrobial resistance gene. This information is more reliable than traditional methods.

Molecular diagnostics is becoming increasingly utilized to improve the quality of patient care. The BioFire RP2.1 plus panel makes use of an syndromic method to simultaneously target 23 of the most frequently identified pathogens that cause respiratory infections. The assay can be performed on the BioFire FilmArray 2.0 and Torch systems, and delivers results in about 45 minutes.

In the US the US, this test is available currently under FDA Emergency Use Authorization (EUA) and will be made commercially available once the initial DoD demand is satisfied. In addition the BioFire Defense Team has developed a fully-automated, sample-to-result assay that allows for the quick identification of COVID-19. The test is currently in development and will be available when initial DoD demands are met.