• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of specific steps to add an additional ignition key. It requires dealer service using the handheld computer known as Tech-2. Then a new car key and transponder have to be purchased and then programmed to the car.

Rotate your keys to stop one from wearing out more than another. This will also help to keep your keys in pristine condition.

Replacement Case

Contrary to the classic Saab keys of old, the new key fobs contain electronics that make it difficult to make a copy. This has made stealing cars considerably more difficult than it was a few years ago. But, it has also made the replacement of lost keys a more expensive undertaking.

Every owner of a 9-3 Saab should have at least two working keys. If one is lost it is expensive to replace it in the car, as it requires replacing the CIM module and reprogramming the locking cylinders. Dealers typically charge between $100 and $200 to complete this.

There are options to avoid the high cost. Some parts providers will use the code of an old key to cut a brand new metal blade for less than the cost of the dealer. The key must be the exact same as the original in order for it to function in your vehicle.

You can also replace the case yourself by following these steps. You'll require a flathead and patience. With the screwdriver, pry apart the plastic, and then take off the emergency key. Once you have the case opened, take out the electronics and place them inside the new case. Make sure you insert the correct key and badge inside the case.

Replacement Battery

The saab key programming near me 9-3 replacement battery is a cheap part that can be easily and quickly replaced. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to get a saab replacement key to replace the battery for the remote key fob in only four steps. This tutorial will work with any modern Saab key fob. However, the procedure could differ slightly.

The button is normally located close to the saab car key replacement logo on the back of the fob. This button is usually on the back of your fob next to the saab 93 key Logo. Then, use a flathead screwdriver into the small hole inside this button. This will allow you to open the case of the fob to allow you to replace the battery.

After the new battery CR1632 is installed it is possible to reassemble the remote key fob. You can then program it to your car. The whole process should not take more than one hour. It's a simple process that doesn't require any special tools.

If you lose a key the process is a bit more involved however it can be completed. The dealer will first need to read the VIN of the vehicle before requesting an additional TWICE module and key blade with the proper unique code. After that, they'll be required to cut the replacement key and then program it with a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car, it has a battery inside. The batteries have a lifespan that is a long time, and they eventually go out of service. This is a problem that affects all cars and the good thing is that you can replace the batteries on most key fobs and not have to replace the entire case. Amazon sells replacement fobs that already have all the electronics installed. You can simply open the case and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To accomplish this, simply insert an small screwdriver with a flat head into the slot that is in the middle. The case should split when you turn the screwdriver around it.

If you are about to replace the keys ensure you have spare keys, as this will reduce your total cost by a significant amount. If you have spare keys, you can ask the dealer cut an entirely new key and then program it to your car, which is cheaper than replacing the entire key fob.

If you don't have a spare, it is possible to add an additional key to your car, but this requires a lot research and effort. Adding a second key costs a few hundred dollars, and it also requires the programming of the car's computer. This can be accomplished by a professional, but it's a costly choice for the majority of owners.

Replacement Ignition

In contrast to the earlier Saab automobiles, the new SAAB 9-3 models are equipped with an extremely sophisticated alarm system that is based on a coded key. If you lose your only key, it could be costly to get another one, as the car has to have a special computer added and be programmed to accept a brand new key. Even dealers can charge hundreds of dollars to program an additional key when they are not able to complete the task.

Dealers will charge you a high price to replace your car's computer (also called the CIM or SAAB twice) in the event that you lose your sole working key. We can reprogram the existing EEPROM inside your car's computer to be prepared for a new key. This will save you more than 50% off what you would have to pay the dealer.

If you have owned a car like the saab keys 9-3 for quite a while, you know that the ignition keys are not very durable. If the ignition key you have isn't working properly, you should consider replacing it. They can become very sticky and the buttons can fall off. The good news is that replacing the ignition key isn't as complicated as it seems, and it can be done in a short time with the proper tools.