• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions from theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs to operate.

The device uses existing buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence of up to 20 presses long. This will allow your vehicle to begin.

Simple change of PIN code

With the growing rate of vehicle theft, many owners are seeking to improve their security. There are a variety of security devices that are sold aftermarket including tracking systems, immobilisers and alarms. Not all of them are equally effective at protecting your car. A tracking device can help you locate your vehicle if it's stolen however it cannot stop the crime. Immobilisers, in contrast are exactly what they state on the tin - they shut down the motor of your car so that it isn't able to be started. The autowatch ghost installation ghost 2 immobiliser installation near me immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your vehicle.

By using the buttons that are already present in your car The ghost device generates an unique sequence that must be entered before the car's engine will start. This can be done by using the heater, window or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This option is particularly useful when you need to surrender your car for valet parking or servicing because the immobiliser is activated and not disabled.

The Ghost is a unique and innovative device that works in conjunction with buttons of your car instead of being a separate unit. This means it's not just a powerful security measure against theft from your vehicle but it can also be transferred to any future vehicles you may own, making it much more investment-wise than the traditional lock on your steering wheel.

Weatherproof small device

The Autowatch Ghost Immobiliser is a high-tech security device that shields your car from key cloning and hacking. It also stops ECU swapping. It's a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for additional wiring and has been thoroughly tested to ensure it works with all vehicles. It is also immune to jamming devices, which are a common technique used by thieves to get around immobilisers.

The advantage of using CAN data is that it operates in a silent manner compared to traditional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by conventional diagnostic tools. The Autowatch bmw m3 ghost installer does not use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, the centre console, or door panels, to create a unique sequences for disarming. You can make this sequence as long as 20 presses to provide additional security. The iPhone app only allows one connection, with a unique pairing code for the Ghost. All communication between the two devices is protected.

The ghost immobiliser problems (next page) prevents car thieves adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. The engine can only be started if a valid PIN code has been entered. It is also possible to put it into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to give your car to a valet service for maintenance without having to enter a PIN.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device detects electronic signals to disable the system of your vehicle from going through its normal startup routine until you input a custom passcode. The system can be activated or deactivated by using your smartphone's app without the need for wires.

The standard factory immobilisers work with a transponder which is built into the key. This sends a message to the ECU. The car will begin to start if the correct code is sent. However, if a transponder from another vehicle is used instead, the immobiliser doesn't recognize it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It shields you from hacking or key cloning, and even key theft. The only way thieves could take your car is by physically towing it away and even then they would not be able to drive it.

Ghost uses buttons on your vehicle, like the indicator stalk, the steering wheel, and the door panels, to create unique PIN codes which must be entered in order to use your vehicle. This is performed without the need for additional hardware like key fobs and can last up to 20 presses long. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code grabbing technologies to detect that a system has been installed.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is concealed within the vehicle, so it cannot be removed or disabled by thieves. It's more difficult to remove from a car alarm which requires disarming with the use of a button sequence. This makes it a perfect alternative to a GPS tracker which helps locate your car after it's been stolen.

Emergency PIN code override

You don't have to look far on social media to find stories or videos of cars that have been stolen with the latest technology tools. This includes key-cloning and hacking tools that allow you to start your car without your original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of security how to become a ghost immobiliser installer prevent your vehicle from being stolen in the event of being targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel, and the centre console. The unique pin code is entered in conjunction with your original key fob in order to stop the engine from starting. The unique PIN for override is on the black card that you will receive after installation and is easy to remember because there are no LED indications.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, so it cannot be detected by modern thieves using diagnostic software that is able to recognise what type of security system you have installed. This makes it a fantastic alternative to the tracking device.

In contrast to other security systems, which have a relay in the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependent). This allows them to shut down a vehicle completely, by sending a digital block to the ECU and engine.

It is also possible to connect an analogue immobiliser, alarm or tracker to these systems, however this must be specified prior to installing the device. They are also fully service/valet mode compatible and a great alternative to a tracker if you are you have your car checked for an electrical fault at the dealership.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen with the owners' keys. It's now easier than ever before to steal your pride & joy with the availability of key cloning tools & door lock picks. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your vehicle was stolen.

It connects directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't utilize radio frequencies or a key fob. This means that it can't be detected by diagnostics or any other car hacking devices. It also stops you from introducing a new ECU or key to bypass the system, because only the PIN number allows the engine to start.

The device is hidden in your car and can be reached via the buttons on your steering wheel, center console, and door panels. A unique and changeable PIN code sequence of up to 20 digits must be entered before you are able to start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car from being moved away or even started if a PIN code isn't entered prior to. If you are driving away with the device arming the indicator will flash on your dashboard which will flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to run as normal. If you don't enter your PIN at this time the indicator will continue to flash and will require a new pin code each time you attempt to start your vehicle.