• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need to find some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

If you plan attempt to remove the glass panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will stop drafts and water from entering your property until a professional comes out to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. Over time, they can develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can get at the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism wearing out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and do a test fitting. The corners of the sash must align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer can be applied. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and Window Repairs decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris in them and ensure that the sill pan is angled correctly to drain away from the window repair near me. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze, it may be hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is simpler when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can check this by checking for the arrows on each hinge. This shows which way the window repairs should be opened.

The issue can be caused either due to opening the window in the wrong way or a faulty installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to provide suggestions.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also due to wear and tear can become misaligned, this will cause an opening to appear where the sash joins the frame. This can be easily fixed by giving them a good clean, but if they are beyond repair it could be necessary to get them aligned or replaced. Secondly the interlock, this is on the hinge side of the window, may also be misaligned, and again it may be possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

These seals can wear down or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.