• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement will generally fit within the old frame very easily. However, if windows with double glazed window repairs panes are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this situation, you will need to locate some plastic spacers that will help the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.

It's a great idea seal the gap after the glass is removed. This will prevent water and drafts from entering your property until a professional is able to fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the distance between the door and the window is substantial, you may prefer security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. You'll first need to close the window and perform a test fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the problem is, the old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you may have to replace the window repairs near me.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be repaired by a upvc window repairs near me window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens with a breeze. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It is very easy to replace a hinge on a window but it's much simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. You can do this by looking for the arrow on each hinge, this shows which way the window should open.

The issue could be caused either by opening the window incorrectly or a faulty installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be pleased to offer you suggestions.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges can also become unbalanced due to wear, which can cause an opening where the sash meets frame. If they're beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it may be possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The second most frequent reason for draughts is window seals, these can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to replace them than to repair them. If you encounter any issues with your upvc window repair window you should consult an expert as soon as you can.