• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet come and go as they please without having to let them in or out. They also help keep your cat from having to go to the bathroom inside the house.

Fitting a cat flap in the door panel made of upvc is much simpler than installing one in a glass door, but it requires some knowledge and the appropriate tools.

Measure the Door

The installation of a cat flap in a front door can be difficult however, so long as the cat flap is the correct one and you follow the directions it shouldn't be too difficult. We will show how to trace the shape, use a jigsaw to cut out the door's opening and then complete the job by fixing the flap to the door. This will ensure that the flap stays in place and protects the door from wind and rain causing damage.

The first thing you need to do is determine the width of your pet to get a precise measurement of what size of cat flap you'll require. This will allow you to select a flap that is big enough to allow your pet to walk into the house and leave without having to open the door each time.

Once you have the measurements, you can determine where on the door the template should be positioned, usually, this is done using an X, however some kits come with drawings that show the location to drill, if you have one, then attach it to the door and use a pencil to draw around it. If your door has a moulding or sill on the bottom of it ensure you have enough clearance from these because this will keep your cat safe and prevent them gaining access to your home.

Set a square to ensure that you are cutting correctly and to make sure the hole is in a rectangle shape. Once you are happy with the result, you can begin removing the remaining door material. If you own a square that you have cut, make use of it to verify whether you're cutting in the right way and to make sure the hole is a proper rectangular shape. Once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without having to worry about them being in the house with guests or leaving unwanted gifts in the home. It also stops draughts and helps to keep your home's temperature steady. However, installing an animal flap on your door might seem like an overwhelming task for those who've never done it before, leading many people to call a professional carpenter or joiner to complete the task. While this is definitely an option, it is possible to do the job yourself if you own the proper tools and follow instructions carefully.

While this is far simpler to accomplish when using a timber door it is still feasible in uPVC doors, though you should be careful not to scratch the doors as this will invalidate the warranty. First, you need to measure the door to make sure it will accommodate the new cat-flap. This should be easy enough if you are using the standard uPVC door, however you might need to take extra care if you are using an insulated or composite type of door as these can be more difficult to cut than solid upvc cat flap door panels panels.

The next step is to measure the height of your cat's belly. This is the amount of height between the floor and the bottom of your cat flap in bifold doors's stomach. It is important to locate a space on the door that allows your cat to comfortably pass through. Once you have the information you'll be required to mark the space using a spirit level and a pencil, so that you are certain that the opening will fit your cat.

After you've marked the area, it's time to cut the hole. You will require an jigsaw. It is crucial to be patient to ensure that the cuts are clean and smooth rather than uneven and rough, since it could cause damage to your door. You should also remember to wear safety glasses and a dust protection mask at all times when using the jigsaw, as inhaling the sawdust could be harmful to your health. After you have finished cutting the hole, you'll require sandpaper to smooth the edges so that the cat flap can be easily inserted.

Make a hole

The process of fitting a cat flap to an existing door panel or double glazing sealed unit is quite difficult. If you are not very proficient in DIY, it is recommended to hire a professional to complete the job for you. A mistake in the process may not only look ugly, but it could also be a security risk and also allow cold air to enter when the cat is outside and hot air to escape inside.

The first thing you need to do is draw the location of the hole in the door using a pencil and a spirit level, this will ensure that it is placed and runs flush with all other parts of the door. Make sure you have sandpaper in your possession to smooth any rough edges.

Wear the safety equipment you require when working with an electric tool. If you're worried about the noise, you can get a jigsaw with a cord that is quieter and easier.

It is best to only remove the material required to fit the flap. It is essential to leave some extra material to cover the wall of the cat flap. However, removing too much can cause problems or even damage the frame of the door.

A door made of upvc may include a metal frame, or a panel inside that could interfere with the microchip cat flap and if this is the case you'll need to cut an oversize hole to ensure the metal does not touch the the cat flap, if this is done, it is important to fill in the gap and make it watertight.

If you're planning to install a cat flap in upvc door panel flap into the frame of a double glazed windows with a metal frame, you will need to speak to a professional who can provide you with a new pane of glass that already has the hole for the cat flap inside. This is less expensive than trying to install the flap into an existing pane of glass that was not designed specifically for this purpose.

Place the Flap

Cat flaps give your pet the freedom to come and go whenever they want and let them relax in the home whenever they'd like. However, if you own an uPVC door, it might be difficult to fit a cat flap, especially if you don't own glass panes that could be cut to accommodate one. If you're looking to install a half-glazed uPVC replacement upvc door panel with cat flap panel, it's possible to add the cat flap. It's not a simple matter of slicing holes in the door. You'll also need to do a few things to ensure that the door is secure.

A composite, uPVC or GRP door panel is typically comprised of a plastic skin which is bonded to an insulating polystyrene core. It is essential to be careful when cutting the material. This kind door has a template can be used to cut the hole.

Once you've marked the opening in your front door, it is time to install the cat flap. You can buy and fit a wide variety of different models including basic button operated ones to microchip-activated ones that allow only your pet. However, regardless of what kind of cat flap you pick, it's important to make sure that your cat is able to use the flap without becoming trapped in the weather.

A circular fitting is more effective than a square, because circles can be cut more securely into the glass. This is because square holes can make glass more vulnerable to cracking if a drill is used on it. This is also a safer choice since you don't have to drill into the toughened glass, which could break and cause harm to your pet or your family members. This is particularly important if you have a child or an elderly person living at home who could be hurt by shards of glass.