• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

how to program Saab 9-3 key fob to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of unique steps to add a second ignition key. This requires the use of a handheld computer, known as Tech-2 that is operated by the dealer. Then the transponder is replaced and a key must be purchased.

Rotate your keys to prevent one from wearing out quicker than another. This will also keep your keys in top condition.

Replacement Case

In contrast to the traditional Saab keys of old keys, the modern keys have electronic components which makes it difficult to copy. This has made car theft considerably more difficult than it was just a few years ago. It also makes it more expensive to replace keys lost saab key.

Every owner of a Saab 9-3 needs to have at minimum two working keys. If one is lost, it costs a fortune to replace it in the car since it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are ways to avoid these costly costs. Some parts providers will look up the code from an old key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade out of metal for just a fraction of dealer cost. The key must, however, be the same as the original one to function properly in your vehicle.

You can also change the case yourself by following these steps. You'll require an open-faced screwdriver and patience. With the screwdriver, slowly break the plastic and separate the emergency key from the case. Once the case is open, remove the electronics and place them into the new case. Place the key with the correct badge into the case.

Replacement Battery

The replacement battery for the Saab 9-3 is a cheap part that can be replaced quickly and easily. The YouTube video of Cyclone Cyd demonstrates how to replace the battery for the remote fob in just four easy steps. This guide should work with any modern-day saab key fob however the procedure might differ slightly.

The first step is to locate the button that will release the backup key in the fob. It is usually located next to the Saab logo on the back of the fob. Then use a flathead screwdriver into the small hole of this button. This will be enough to allow you to open the case of the fob to allow you to replace the battery.

After the new battery CR1632 is in place, you can reassemble the remote key fob, and then program it to your car. The procedure should take no more than an hour or less. It is a simple procedure that doesn't require any special tools.

If you lose a key the process is a bit more involved, but it can still be completed. The dealer will first need to read the VIN of the vehicle and then order an alternative TWICE module, as well as a key blade with the proper unique code. The dealer will then have to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob contains batteries that are used to lock and unlock your vehicle. Batteries have a limited lifespan and will eventually fail. This is a frequent issue for all vehicles. The good news is you can change the batteries in most key fobs, and not have to replace the entire case. You can buy replacement fobs on Amazon that come with all the electronic components already installed, so you'll be able to just pop open the case and replace those batteries that are old. It is important to remember that you will need to take out the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot that is located in the middle of the case. The case will split once you turn the screwdriver around it.

If you're ready to replace your keys, have a spare available. This will save you lots of money. If you have an additional key, ask the dealer to cut the key and program it for your vehicle. This is a lot less expensive than purchasing a brand new key fob.

It is possible to add another key to your car if you don't already have one, but it will require lots of research and effort. It costs around a hundred dollars to purchase an additional car key. The computer of the car must also be programmed. This can be done by a professional, but it is an expensive option for the majority of owners.

Replacement Ignition

Unlike earlier saab 9-3 key programming cars, the modern SAAB 9-3 models use an upgraded alarm system that is based on a coded key. This means that when you lose your sole functioning key, getting another one could be very expensive as the car has to have a special computer module fitted and also needs to be specifically programmed to accept a new key. Locksmiths typically aren't able to program this and dealers will charge hundred dollars to program the new key!

If you've lost your sole working key, a dealer will replace the computer in your car (known as the CIM or saab key programming TWICE) to create an exchange, and they will charge a premium for it. Instead we can reprogramme the EEPROM on your existing car computer to allow it to be programmed for a replacement key, saving you over 50% of what you'll pay at a dealership.

If you've been a faithful owner of a 03-11 saab replacement key 9-3, you probably realize that the ignition key isn't very durable. If your ignition key is not functioning properly, you must think about replacing it. They can become extremely sticky and the buttons have been known to fall off. Fortunately, replacing the ignition key isn't as difficult as it sounds, and it can be done fairly quickly using the proper tools.