• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacing Double Glazed Window Handle

Replacing a double-glazed windows handle is fairly simple as long as you follow the proper steps. First, you must determine what type of handle is in place and measure the spindle.

Cockspur handles are still sometimes used in older uPVC windows, however they have a different step height in comparison to aluminum counterparts (also called spade handles). This means they require an extended spindle.

Take a look at the Spindle

In the case of replacing the double-glazed window handle, it is necessary to measure the spindle length to ensure you are buying the right replacement. Spindle length is the measurement of how far the handle extends out of the base plate or how far it goes into the lock. It will vary from handle to handle. When measuring the length of the spindle, it is crucial that the handle from before isn't removed because you may be unable to get a good reading in this case.

In general, it is expected that the new handle will come with a spinning part. However, you'll find that the dimensions of the spindle differ between different manufacturers and handles, so it's best to check when purchasing one. To save time and energy, it's best to buy the spindle and handle together.

Espag handles are the most common type of handle in uPVC windows. They operate an internal locking mechanism hidden within the frame that allows them to open and close. They are available in a variety of styles and colors to fit your home. When selecting an new Espag handle, you need to be aware of the spindle length as it can make a difference to the degree of security your window has.

These handles can be cranked to the left or right, based on your preferences and they are also available in a range of sizes that can be used to fit a large variety of frames. These handles are an easy and effective solution for your double-glazed window handle lock key replacement.

The tilt and turn window handle is another common handle. These handles are typically large and durable, since they lock in two locations when opening windows. They are available in a variety of finishes, including chrome, stainless steel brass, white uPVC that can be matched to your ironmongery.

Finally, there are cockspur handles, which are a more traditional form of window handle, with an elongated spur which pushes up against the wedge on the frame. They are an easy and efficient choice for double-glazed windows. They come in various nib and nose heights to fit a variety of designs.

Take the handle off

There are various handles available for uPVC double-glazed windows. The most common type are Espag handles, which have a spindle that runs through them and engages with the locking mechanism of the window frame. Other types of handles include tilt and turn handles, that allow you to tilt the window open to get ventilation or completely open. They are typically heavier and usually have more complex mechanisms but they also offer greater security. Certain handle styles can be utilized with a key lock which can provide additional security for your home.

It is crucial to check the handle prior to replacing it. This will allow you to determine whether a new handle, or an existing one only requires a tightening or if it's time to replace it. If the handle is damaged the handle will need to be replaced completely.

If the handle seems to be loose, then it may need to be tightened or retightened. Using a screwdriver, locate the screws inside the handle and take them out. Be cautious not to use a power tool as it may cause damage to the window handles for wooden windows frame or the handle. Once the screws have been removed, put them in a safe place.

After the handle has been removed from the window frame you can take it off and replace it with the new handle. Start by placing the new handle in a way that the holes on the window frame line up with the holes on the base of the handle. Once you are happy that they're aligned place the new handle and screw it in place.

Once you're done, test your newly installed window handle by closing and opening the window handles for timber windows several times to verify that it functions as intended. It is essential to tighten the screw when you notice any movement or looseness. This can cause the handle to become unstable, or even be able to fall off.

We offer a range of replacement window handles available in a variety of colors, including white, black, chrome and brass. We stock espag handles, inline handles, cranked handles, and tilt and turn handle for all types of uPVC windows as well as timber windows and aluminium frames. Depending on your requirements we also offer slimline handles that reduce the overall size of your handles which is ideal for situations where space is a concern.

Take the Screws off

You'll need to take off the plastic covers that cover the screws on a window handle before you install new handles. They are usually located above and below the handle when it is open, and you can prise off the screws using the help of a screwdriver or a fingernail. Be sure not to lose any screws when removing the caps.

Based on the requirements you have depending on your needs, there are a range of choices for the type of handle you replace. For instance, if looking for something sleeker than the standard handle then slimline models can be ideal. These handles are designed to fit on the same spindle as traditional handles, however they are smaller and will not interfere with blinds or shutters. There are chrome, stainless steel, and brass options, which can complement the other ironmongery in your home.

After removing the old handle, you can start preparing your replacement. You will need to identify the kind of handle you have, and then measure the length of the spindle, prior to selecting the replacement. You must ensure that the new handle is a suitable size for your uPVC windows and that the screw holes are aligned with your existing ones.

It is important to ensure that the handle is in the open position, and that the spindle has been properly placed before installing it. Then, align the fixing holes in the handle with the hole in the window, and put the pins or screws in. Be careful not to over-tighten them, as this could cause the window frame crack.

You'll need to test the handle by locking and unlocking the window. You should repeat this process repeatedly to make sure that the window lock works and to check if there are any problems. If you are happy with the performance of the new window handle, you can replace the cap screws and put the cover back on.

Fit the New Handle

A uPVC window handle is generally designed to last for many years however, it could be damaged and require replacement. It is essential to determine the reason for damage before making a decision on the next step.

In the majority of cases, a loose handle on a window has to be tightened in order to fix it. This will involve taking the handle off and locating the fixing screws that secure it. Usually, these screws are hidden on the inside face of the handle, but they can be located by using a screwdriver, or a pair of pliers. Once they are removed, you can separate the spindle from the handle.

After removing the handle and replacing it with a new one. It's a straightforward process however it requires careful attention to ensure that the screws are firmly in the correct position. The handle should be placed correctly, and then locked in place.

There are a variety of handles based on the size and type of your window. Cockspur handles are available, as well as tilt and turn handles as well as Espag locks. Each has its own characteristics, so you have to make sure that you choose the correct handle for your window.

If you are replacing the handle of a Cadenza handle, for example it is essential to ensure that you are using an identical handle in terms of blade design and fixing centres. If you choose to use the handle with a flat blade, and an angled blade handle should be used, the blade will break.

In general replacing a double-glazed window handle is a relatively simple process. However, it is important to keep in mind that there are different sizes and styles of uPVC window handles, therefore it is vital to measure the spindle before purchasing a replacement handle. By following the steps outlined above, you will be able to put in an additional handle in no time.