• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires offer a warm, Luxury fireplace cosy form of heat with no harmful gases or soot. They are easy to install similar to an electric fire.

The BARDA contract will support the development of the BioFire emerging CoV panel, a nucleic-acid amplifying test that can be used with BioFire filmArray Systems to detect of known and emerging human acoronaviruses in nasopharyngeal or swabs and saliva samples.

Eco-friendly

Bioethanol is an eco-friendly alternative for gas or wood. The fuel is made from plant by-products and utilizes an natural process to convert sugars into alcohol. Bioethanol has numerous advantages over other types of fireplaces that include the absence of harmful emissions and a much less carbon footprint. Bioethanol is a better alternative to other types of fireplaces because it doesn't produce smoke or soot. It doesn't require a flue and can be used anywhere in the garden or at home.

A multi-drug resistant (MDR) bacteria is among the most serious health risks of the present. New testing methods can detect MDR bacteria early and avoid further complications. BioFire FilmArray is one of these tests. This test uses a symptom-driven approach to detect common pathogens that cause sepsis. The results are available within an hour so that providers can begin treatment right away.

Molecular PCR is a process that amplifies DNA or RNA molecules into millions or billions of copies. This allows for Luxury fireplace the analysis of small amounts of body fluids or tissue to determine if certain genetic sequences are present. It is a useful tool for lab professionals, and helps them identify serious illnesses in a timely and cost-effective way. The BioFire film array PCR system is an innovative instrument for diagnosing infectious diseases. It can be utilized in many locations including laboratories and hospitals.

If you are undergoing respiratory tests, you can apply a swab of alcohol to your nose prior to sending it to the lab. BioFire's system allows doctors to react quickly and has a short turnaround time. This means that patients will enjoy better outcomes and spend less time waiting for results.

The Chanouf Farm Biofire company has created an agroforestry recycling unit that uses pear and olive waste to make biomass power and organic charcoal. The products are offered to the general public to replace traditional wood charcoal and coal briquettes with green alternatives. In addition they can be used to fuel the Kachelofen fireplace that provides radiant heat that is greener than electric and gas-fired fireplaces.

Clean burning

When you utilize a bio fire you aren't just saving energy, you're also helping the environment by using a renewable fuel source. Bioethanol combustion doesn't produce harmful gases like carbon dioxide. Instead, it releases only water vapour and heat. This makes it a cleaner and safer option for indoor use.

Ethanol can be produced by fermenting sugars from plants. It is a renewable source of fuel. It can be produced rapidly and won't be depleted like fossil fuels such as oil and coal. Bioethanol helps reduce dependence on imports from foreign countries and increases the chance of shortages.

Bio-fires are very easy to install and can be used in existing Luxury Fireplace openings or as a freestanding unit. This makes them a great alternative to wood and gas fires. They also make an excellent choice for homes and offices without a chimney or flue.

When a bio-fire is lit, a specific media is installed in the burner to absorb the liquid ethanol fuel, making it available to burn. The ethanol is ignited by the flames, and the vapours are emitted into the air via the vent. This makes the flames appear more natural and creates stunning beauty that cannot be replicated with wood or gas fires.

Bio-fires have the advantage of not needing a vent or flue to replenish oxygen in the process of combustion. They also don't produce carbon monoxide which must be vented into the air in gas fires that are open-fronted.

The BioFire Respiratory Panel employs multiplex technology to simultaneously test for 19 respiratory pathogens within an hour. This allows doctors to detect and eliminate respiratory diseases much faster than they can by using standard lab tests that require patient visits. This reduces time and costs for both the patient and the health system.

Safe indoors

Bio-fires are far safer to use indoors than traditional bioethanol fireplace fires because they release no smoke or ash, nor carcinogenic fumes. They don't release carbon monoxide which is dangerous if breathed in. However bio-ethanol fuel is flammable and you must be careful when handling your burner and refilling it. The fuel should only be added after the burner has been turned off and the fire has cooled. Any spills should be cleaned immediately.

The company's diagnostic FilmArray system, BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels approved by the US Food and Drug Administration as well as three additional panels approved for use in emergencies, and six environmental test panels. The tests include a respiratory panel developed to quickly identify and discriminate respiratory diseases such as COVID-19, emerging coronaviruses and COVID-19.

The COVID-19 panel has been awarded a grant by the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 test is an antigen-based one that allows clinicians to differentiate between the symptoms caused by COVID-19 and other respiratory infections with the same precision as the current rapid antigen tests being used.

In addition the company is in the process of developing an SARS-CoV-2 test for its Respiratory 2.1 Panel. This multiplexed nucleic acids test for amplification will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens using nasopharyngeal and saliva samples in less than an hour. The assay is being developed using an speedy timeframe and submission to FDA for EUA and 510(k) approval is expected in the third quarter of 2020.

bio ethanol fireplace-ethanol flame effect fires are safe to use but must be kept away objects that are combustible, such as curtains, pillows and blankets. It is not recommended to place them near anything that can catch fire. Keep flammable materials away from the flame-effect fires by at minimum 10 feet. The bioethanol fuel should be stored in a secure, dry location that isn't easily accessible by children or pets.

Simple to use

A bioethanol fireplace is simple to install and has no flue to be concerned about. It is all you need is a place to store it and fuel. After you've filled the burner, light it. This will give the appearance of a real flame. Once the flame is lit, it will heat up the room without much smoke. It also produces heat similar to a wood-burning fireplace. They are also simple to maintain and don't require any servicing. Just a quick wipe down is all they need.

Contrary to most tests that are rapid however, the BioFire RP2.1-EZ test uses a syndromic method to identify common symptoms of infectious diseases and can return results in about 45 minutes. The test is designed for patients suffering from upper respiratory symptoms and has a 98% specificity rate. The test can detect up to 19 bacteria and viruses in a single sample making it an excellent option for the treatment of patients.

The BioFire platform integrates multiplex testing, sample preparation, and results reporting in one platform. This allows laboratories to simplify their workflow and eliminate the need for a serial method that involves sending out individual tests. This could lead to improved patient outcomes by enabling the appropriate test to be utilized the first time and by removing the need for expensive tests based on culture. The BioFire system is able to identify pathogens on a individual level and also their antimicrobial resistance gene. This information is more sensitive than the conventional methods.

Molecular diagnostics are increasingly used to improve patient care and outcomes. The BioFire panel RP2.1+ utilizes an syndromic approach to simultaneously focus on 23 pathogens that are commonly implicated in respiratory infections. The assay is available on the BioFire film array 2.0 and Torch systems and provides results within 45 minutes.

In the US the US, this test is available currently under FDA Emergency Use Authorization (EUA) and will be made available commercially after initial DoD demand is satisfied. Additionally, the BioFire Defense Team has created a fully-automated, sample-to-result assay for the rapid identification of COVID-19. The test is currently in development and will be available when initial DoD demands are met.