• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Tips For Replacing a Window Handle

It is easy to replace your window handle from the comfort of your home. Follow these tips to ensure an elegant and smooth finish.

Take off the screw covers from your uPVC handle to expose the screws. Then measure the spindle length to ensure you get the correct size replacement.

1. Determine the length of the Spindle.

If you're replacing a window handle, it's important to determine the dimensions of the spindle correctly. This is because it will determine how tight or loose the handle is, and whether it's able to lock properly inside the frame of the window. The spindle is the steel shaft that connects the handle as well as the lock in the frame of the window. The spindle can be either a standard 8mm cross-section in the industry or the older 9mm versions. Modern industry standards are 8mm but it wasn't always that way. It is important to confirm the measurements before buying a new handle.

The easiest way to measure the length of the spindle is to remove the existing handle, this can be done by turning it to the open position and then removing the two screws (which may be hidden behind plastic caps that will have to be removed) which hold the handle. Once the handle is removed, take a measurement from the base to the end. This will provide you with the measurements you need to purchase a replacement.

There are a variety of options when you are looking to pick the right window handle. From sleek chrome that will fit into modern homes to traditional burnished bronze that looks beautiful in restored Georgian rooms, or the more quaint Tudor Cottages with mongoose tails curled. The possibilities are endless, but the most important thing is to choose a style that suits your home.

Espag handles are generally fitted to uPVC windows and are identical in size with 43mm centres (2 fixings). Cockspur handles can vary between 58mm and 62mm however there are replacements for both sizes. Window handles from Cadenza come in a different size due to their angle blade that operates an interlocking mechanism that is multi-point inside the window.

When you are choosing a handle for your window, you should also consider the hand you use to open your aluminium door handle. Inline espag handles can be used for left or right-handed windows. Cranked window handles are only compatible for windows that open in one direction.

2. Take the handle off

The handle may be damaged or simply worn out, a window handle that falls off can be a real pain. The good news is that you can fix a uPVC handle by yourself. You will require only some basic hand tools and some time to complete the process.

You must first open the window, and make sure it's not locked. Next, you need to remove the screws that hold the handle in position. Once the screw caps have been removed, you will be able remove the handle.

The handle is attached to a spindle within the window frame. Depending on the kind, this is held in place either by a screw or pin. The most commonly used handles for doors are the inline Espagnolette and cockspur handles. Both of these kinds of handles are utilized on casement windows, including aluminum windows. The handles can be locked by using a key to stop unauthorised access from outside. You can also sash lock door handles the handles for internal bifold doors by turning them clockwise.

To remove the handle, you will require a flat-bladed screwdriver. After the clip has been released, the handle should slide off the spindle. After the handle has been removed, you'll need to measure the length of the spindle and ensure that your new handle is compatible with this measurement.

Once you have the proper size, you can now put the new handle in place. You will need to ensure that the new handle is firmly secured and that it is turning in the correct way (clockwise for open and counterclockwise for closed). It is essential to ensure that the handle has not been installed upside down.

Then, you must replace the screw cap caps. Once you have done this you can test the handle to confirm that it functions properly. You should also test the locking mechanism by moving the handle from the locked position, and then back to the locked position.

3. Take the Screws off

A upvc door locks and handles window handle is an integral part of any home and is often the first thing to begin to show signs of wear and tear or damage. This can be due to natural elements, regular use or even intentional damage by criminals trying to gain access to your home. A simple fix can resolve the issue and stop it from happening again.

UPVC handles can also be difficult to remove if the locking mechanisms aren't working properly. Most of the time, the issue can be resolved by replacing the multipoint lock rather than the entire handle. It's definitely worth a look because it could save you money.

After you have removed the handle, you'll have to take off the screws that held it in place. They're usually on the inside of the handle base. It could be necessary to use a screwdriver do this. Be cautious not to over tighten the handle since this could cause it to become loose.

You will then need to find the fixing screws or pins that keep the new handle in the correct position. They are typically located on the inside of the handle base. You'll require an instrument to remove them. After you have removed them, you'll be required to replace the screw caps if you wish to do so, and then test the new handle to confirm that it's working properly.

Install the handle by aligning the spindle with the cutout in the window mechanism. Then, screw it into. Make sure that the handle is in the open position and that any screws are securely secured prior to replacing the screws' covers, in the event that you want to do so. Once you've completed this, you're done and are able to enjoy your new window handle. I hope this will enable you to avoid having to pay for costly window and patio door handle with lock replacements in the future. Contact us if you need more information on this or any aspect of your uPVC window.

4. Fit the New Handle

The replacement of a damaged window handle or updating it is easy and can be completed within only a few simple steps. Identifying the kind of window handle, measuring its spindle length and knowing what tools you'll require to finish the job are crucial. Safety is always the first priority when working with tools and windows. It is also essential to take your time and follow the steps carefully to ensure you have a working handle that is safe to use.

The first step is to locate the screws that hold your current window handle in place. Then, remove these, whilst keeping an adequate grip on the handle itself to prevent it from crashing and causing injury. Once the screws are removed, you can place them in a safe place to be replaced later.

Once the old handle was removed, you can begin fitting the new one. It is important that the handle fits perfectly to ensure it functions correctly and locks the window in place. Next you need to slide the square metal bar on the handle into the hole in the window mechanism.

After the new handle is installed, the final thing to do is to replace the caps on the screws and test it to make sure it works. If you aren't satisfied with the results, or the window doesn't shut or open properly contact our experts for assistance.

Almost all UK homes are equipped with uPVC Windows. As such, many will need to be changed at some point because of damage or wear. Anyone with some DIY expertise can carry out the process. It is essential that the handle you select is in line with the style and size of the window. Contact us if are unsure about the type of handle you require. They'll be able assist you with all of the possibilities.