• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Guard your precious possessions from car thieves by putting in a ghost immobiliser. Our TASSA confirmed system safeguards vehicles against hacking, key cloning, and immobiliser bypassing.

The system is hidden inside your vehicles wiring loom making it totally invisible to anyone who sees it. It operates by creating the pin code push sequence through existing buttons on the steering wheel doors, door cards and the center console.

No circuit cuts

A car is a prized possession that you spend years of hard work to acquire, so it's understandable why car owners would want to secure their vehicle against theft. But, traditional security systems like wheel locks and alarms can easily be snatched away or taken over by thieves. Ghost immobilisers however, Autowatch Ghost Immobiliser Fitting is a highly effective solution that operates in a quiet manner and is not easily recognized by modern day thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This generates an unique pincode only known by you. The code can be changed at any point and can be as long as 20 digits in length, based on what you prefer. It comes with an emergency code you can use in the event that you forget your PIN.

The ghost immobiliser could also be used to block relay boxes from transmitting the signal of your car's key from within your home, which will unlock the doors and then start the vehicle. It can even block new high-tech methods of stealing your vehicle, such as OBD port hacking. The device is small, weatherproof and autowatch Ghost immobiliser fitting hard to detect. It's also difficult to hack.

The ghost immobiliser comes with a further benefit: it can be inserted into your vehicle without leaving permanent marks. This makes it perfect for those who are planning to sell their vehicle in the near future. It's also faster and easier to install than the factory-installed system.

The autowatch ghost immobiliser fitting Ghost is a groundbreaking next-generation device that prevents vehicles that are stolen through contactless by connecting to the vehicle's CAN data network and using the existing buttons to generate a unique PIN code. This is a stealthy device that can be installed without cutting wires and does not require additional key fobs. It also connects to the original ECU of the vehicle, thus preventing thieves from bypassing it with a new key. This system is TASSA verified and can be linked to an International Security Register, allowing owners peace of mind knowing that their vehicles are secure from theft.

No scanning by RF

You will want to protect your vehicle from theft when you have spent lots of money and spent a lot of time customizing it. Installing an immobiliser is one of the best ways to stop theft. It will stop your vehicle from beginning until you enter a unique code. You can generate a 20-digit code using the buttons on your dashboard and the steering wheel. This will ensure that only you have the right to drive your vehicle. It is also possible to set up a service or valet mode that allows you to start your car for a short period without having to enter the PIN code. This will permit your technician to work on your car without your presence. This is a great feature for those who want to reduce time and make their lives simpler.

A ghost immobiliser is a next-generation device that connects to your vehicle's CAN data network and uses the buttons on the steering wheel and dashboard to programme a personalised PIN code. It is designed to blend into with the vehicle's design, as it doesn't emit any noise or light indicator. It can be put in anywhere on your vehicle, without impacting the appearance of your vehicle.

This stealthy gadget is approved by TASSA and can lower the cost of insurance. It also has a tracking function that can track your vehicle even if it has been stolen. This is especially useful if you own a rare expensive vehicle which you've invested many hours customizing.

Autowatch Ghost, in conjunction with the iPhone app, allows you to remotely start your car in the event that you've forgotten your PIN or are not able to enter your vehicle. This feature is great if you need to take your kids to school or run errands, but don't want to risk the safety of someone else driving your car. This feature is beneficial when you need to take your car to a mechanic for repair or service.

Another advantage of the Ghost is that it is unable to transmit or detect radio frequency signals, which makes it unnoticeable to thieves who employ RF scanning or code grabbing technology. It also shields your vehicle from key copying, ECU swapping and other usual methods of car theft.

No key to cloning

Ghost immobilisers are an excellent way to safeguard top-end vehicles and stop key cloning. They work by preventing your car from starting until an additional PIN code is entered along with the regular key fob. This makes it difficult for thieves to steal the vehicle, and may even stop them from trying. This is a good idea in the event that your vehicle has been heavily modified or is an uncommon model.

The immobilisers are connected to the vehicle's onboard CAN network and are completely hidden, which means there is no indication of its presence within the vehicle. The device is also difficult to detect by using radio frequency scanning technology or code grabbing. This means that a burglar will have to spend a lot more time to take your vehicle.

A thief will need to know the unique pin sequence and the location of the ghost in order to get around it. The pin code is unique to you and can change it as often as you want. The pin code you select is easy to remember but mathematically impossible for anyone else to decipher. Additionally the engineer will have provided you with a backup PIN code override in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof and easily installed in any location of your vehicle. It works with all vehicles and can be fully customizable to match your car's style. It is also simple to use and cost-effective. You can even transfer the device to a different vehicle if you switch vehicles in the course of ownership, providing that the new vehicle is compatible with it.

The CAN bus can be used with other security features. For example, it can detect damage to your vehicle and warn the owner. It could also shut down the engine if the vehicle is damaged. The system also protects your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. In addition, it can notify the owner that the vehicle has been moved.

No OBD port hacking

ghost immobiliser cost utilizes a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, disable your key fob and code new keys. This technology is an enormous improvement on traditional methods that have been employed by thieves in the past to steal your car. The CAN data networks also means that your system will not be affected if you disconnect or change your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking and replica car theft. It is not equipped with LED indicators or key fobs, instead leveraging the buttons on your steering wheel or centre console, as well as the door panels to let you create a unique PIN code sequence (up to 20 button presses) that needs to be entered before you can drive your vehicle away.

Modern thieves use diagnostics to detect cuts in the circuit on your vehicle and can bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not detected by diagnostic tools of a professional. It can be installed even on vehicles equipped with anti-theft devices.

Another major benefit of the Ghost immobiliser is that your vehicle is only able to be started by someone who has access to the PIN number and has physical access to your vehicle. This is a major benefit over security systems that can be bypassed with simple cable tampering, a screwdriver or the use of an universal remote controller.

If you forget your PIN, you can reset it by using the emergency PIN override function on a cell phone or computer. This is helpful when you want to start your car after it's left in a garage or a valet parking service.

The Autowatch Ghost 2 is the latest generation of the product and is affixed to insurance by TASSA when installed by one of our authorised installers. It has the QR fingerprint system to allow individual parts to be identified which allows the return of stolen components in the event of their being discovered. It can also be turned into a'service mode', which will allow the engine to start when the vehicle is in a garage or using valet parking, but you will need to enter your PIN code to get out of the car.