• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a comfortable way to heat a room and conserve energy. However, they require a certain amount of maintenance.

A majority of modern wood stoves comply with EPA emissions guidelines. You can check for an EPA sticker on the grate or under it to ensure your stove doesn't emit harmful pollutants.

How to Start a Wood Fire

The scent and sound of a woodfire is an excellent addition to any home. It's important to know how to create a fire on your stove. Incorrect techniques may lead to an unburned fire that doesn't burn effectively, and can produce creosote or smoke. The tips below will help you start the fire that will warm your home with minimal effort and ensure your security.

Examine the condition of your coals and logs before you begin a fire. If they're too damp, they will smother the flame and stop it from burning properly. You may want to open the chimney to eliminate any ash that falls into the stove.

Begin by placing a handful of small, dry pieces of newspaper in your stove. This will help to ignite the tinder. When the tinder and the kindling are beginning to burn, you can add the larger kindling pieces on the top. This should be done in a crosshatch pattern so there is air between each piece of wood.

If your wood stove has an automatic combustion control, it will automatically pump air into the flame as it grows. This will help the fire to burn at a consistent pace without having to constantly open the stove's doors to maintain it.

Avoid using excessive tinder since it will cause the fire to burn at a rapid rate and not utilize the fuel efficiently. Once you've made a solid bed in your stove of tinder, kindling and embers begin the main flame by placing two large base logs on the grill. Then, on the top of these base logs, place a layer perpendicularly to them. This "top-down" method of building the fireplace will create a long-lasting, efficient fire that doesn't engulf larger base logs.

Close the damper when your fire is established and kept it shut. Opening the damper too soon could cause the fire to smother and will not allow for the correct airflow, which will lower the effectiveness of the fire.

Adding Wood

Stoves aren't just beautiful home décor pieces - they can help you save money by providing efficient wood heat. They can be used together with a central heating system or furnace to provide additional heating for large houses. Many of the new clean burning stoves that are available today utilize advanced combustion technology that can separate the burning volatile substances from combustible gasses as well as tar. This is achieved by providing air at two distinct stages. The first stage is to aid in the vaporization process, and the second step is to provide fresh air that has been pre-heated. This improves combustion and reduces odors.

The amount of heat you get from your stove depends on both the species of wood and the moisture content, as well as the size of the logs. The logs must be stored in a well-ventilated area for several months prior to when you attempt to burn them to allow the wood to dry out. If the logs are not dry enough, they will produce a lot of steam that is in essence wasted energy.

It is Best small wood burning Stove to add wood burners garden to the pile in intervals, not all at one time. Too much portable wood burning stoves added at one time can cause the temperature of the firebox to increase and produces a vortex that sucks smoke and volatile compounds that have not been burned back into the flame, which could reduce your stove's efficiency.

Avoid the use of other combustibles, such as paper or cardboard in your stove, since they are not wood and have very different physical properties and cannot be burned without causing dangerously high temperatures and a lot of emissions. You should not burn combustibles that are compressed, such as wood briquettes because they are different in chemical and physical composition from firewood. They are also not approved to be burned in wood-burning stoves.

If you're installing wood-burning stoves into your home, it's crucial to have it installed and tested by a professional. A certified WETT technician will test the installation for proper operation and safety, and also ensure that your chimney is operating correctly. These experts can also provide maintenance services to keep your chimney and stove in good condition. They will look for leaks in the areas connected to your chimney and repair any issues they spot. They will also ensure that all residents of the home understand and follow the evacuation procedure in the event of an accident.

Adjusting the Damper

A damper controls the amount of heat that is lost to the chimney when you aren't using your stove. It can also be used to control the flame. If the flue is open but the damper is too closed, the fire won't burn properly and it will release smoke into your living area. To ensure that you get the best indoor wood burning stove fire with the damper properly adjusted, you must test different positions and observe how each affects the flames.

Typically, you'll want to keep the damper open enough to let air enter and out of the flue when a fire is burning. This lets the fire get a good fire going and keeps it lit so you can enjoy it for long periods of time. The proper opening will stop the fire from becoming starved of air and will keep it from blowing out smoke.

In order to properly adjust your damper you need to first ensure that the fireplace is heated and the stove is hot. This will ensure the chimney is warm, and that it has a strong draft. After that, the damper for wood stoves can be adjusted.

After the fire has been burning for an extended period, close the damper approximately three quarters of the way. This will stop the warm air in the room from escaping into the chimney, but still permitting smoke to escape.

This is the most effective way to stop the fire from getting too hot while keeping it lit. If you close the damper too far it may stop the draft from working, however if it is too open, a cold wind could enter your home.

Holding your hand at the top of the flue pipe will inform you how much the damper has opened. If you feel a small wood burning fireplace breeze pushing against your hand, the damper is likely to be open.

The damper settings can vary between stoves and even between different kinds of wood. The process of experimenting with the various settings will give you an idea of what to look for, but you might have to keep adjusting it until you find the ideal setting for your stove.

Clean Up

It is essential to clean your flue and stove after a fire. This can to reduce the chance of a chimney fire which is the main reason for wood stove fires in homes. Creosote, a sticky material that can build up within the stovepipe, can be extremely dangerous. It is caused by moisture and unburned wood particles that are unable to escape the fire. It can also happen by fires that are not lit properly.

Regular cleaning helps to keep away the buildup of creosote. The most effective method for doing this is to sweep the chimney each year. It is also recommended that you have your stove and fireplace professionally cleaned and examined at least year.

It is also an excellent idea to clean the ash tray and grates regularly. It is a good idea to only use seasoned cheap wood burning stove for burning, as this will produce less creosote as well as ash. Avoid burning paper, cardboard and plastic. These items can release dangerous chemicals for the air and flue, which can be released into your home.

The glass in the wood burning stove needs to be regularly cleaned as well. Many newer wood stoves are made with self-cleaning glass, meaning that they don't require a lot of cleaning. If you are not able to clean the glass of your wood stove as clean as you'd like you can use stove glass cleaners can be used on the window.

Other tips for maintaining your wood stove are to turn the vent off when you're not using it and slamming a window or door to increase the flow of air. This will ensure that the fire is burning more hot and efficient. The wood stove will not have to be as active to circulate air. It is recommended to not stack logs or keep them in the fire for long durations of time, since this could lead to warping and splitting. It is recommended to avoid using compressed combustible wood in your wood stove since the paraffin that is contained in the logs can melt and leak into the flue which could cause damage.