• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is important to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap between the door and the window is substantial, you may prefer security screens that includes windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll have to open the window so that you can access the frame. Then, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws until they stay in place.

If you are unable to move the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to replace a hinge on a window however it is simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to provide suggestions.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges, also due to wear and tear could become misaligned. This will cause gaps to develop where the sash meets the frame. If they are damaged beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window and can also be misaligned, and again it may be feasible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the possibility of draughts.

One of the most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be positioned on top of your windowsill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as possible.