• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass so that any shards will fall on the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap is large, you might think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can be affected by a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to keep them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to fix the loose uPVC window repair near me handle yourself. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the issue is, the old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze It could be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It's very simple to replace a hinge on a window however it is simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause gaps to develop where the sash joins the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window, may be misaligned. Again, it's feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

With a little maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as you can.