• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. However, if you have double pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional comes out to repair the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is significant, you may need to consider an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, with time, they are susceptible to a range of problems including sagging. A sagging uPVC windows can cause issues with light, draughts and even security. If you find that your uPVC window repairs near me is beginning to shrink, it's crucial to act fast to stop the issue from becoming worse.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you can't reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an initial test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on how serious the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal than the frame. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze, it may be hinges at fault. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like all mechanical parts, hinges can be damaged over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help hold the frame.

Check that the uPVC hinges are closed and open in the right direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos via our website will often solve the issue. We are happy to give advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used as they could damage your upvc window Repair windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear could become misaligned. This will cause an opening to appear where the sash joins the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could also become unbalanced. It is located on the hinge's side and could require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next common reason for draughts is window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric filled with some type of filler. They can be placed on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it may be cheaper to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as you can.