• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double glazed window repairs near me-paned windows that are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case, you will need to source some plastic spacers to assist the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window repairs panes so that any shards fall onto the fabric and not on the floor and could be trampled.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, with time, they can suffer from a variety of issues like sliding. A sagging uPVC windows can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll need open the window to access the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. Often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close the window and perform an experiment fit. The joint at the corner of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how serious the issue is, the old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze It could be the hinges that are at the fault. They can be repaired by any skilled DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is very easy to replace a hinge on a window, but it's easier if someone else helps hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to give assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes a gap to form where the sash meets the frame. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them realigned or replaced. The interlock may also become disaligned. This is located on the hinge's side, and may need to be cleaned. In some instances, it may be necessary to replace these.

The next common cause of draughts is the window seals, these can become worn down or damaged over time and allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.