• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Garage doors are an essential part of our homes, providing security and convenience. However, like any mechanical system, they can develop problems over time. Here are the top 10 common garage door problems and how to fix them.

1. Garage Door Won't Open or Close: This could be due to a power source issue. Check if the motor unit is plugged in. If it is, inspect the circuit breaker, fuse, or GFCI. If these are fine, the problem might be with the garage door opener. You may need to replace the opener or call a professional.
   

1. Noisy Garage Door: Noise usually indicates a lack of lubrication. Apply a high-quality lubricant to all moving parts including rollers, hinges, and tracks. If the noise persists, it could be due to loose hardware or worn rollers that need replacement.
   

1. Garage Door Opens Slowly: This could be due to the door's speed switch being set incorrectly. Check the owner's manual for instructions on adjusting the speed. If this doesn't work, the door might be off balance or the springs might be worn out.
   

1. Garage Door Closes Too Quickly: This is a serious safety issue and could be due to broken cables or tension springs. Do not attempt to fix this yourself as it can be dangerous. Call a professional immediately.
   

1. Garage Door Remote Doesn't Work: First, check the batteries. If they're fine, you might be out of range or need to reprogram the remote. If none of these work, you may need a new remote.
   

1. Garage Door is Off Track: If your garage door isn't aligned with the tracks, it won't operate smoothly. This could be due to a hit or worn rollers. You can realign the door by loosening the screws that hold the tracks, adjusting them, and tightening the screws. Should you cherished this short article as well as you wish to acquire more information regarding garage door tune-up cost generously pay a visit to our internet site. If this doesn't work, call a professional.
   

1. Garage Door Won't Seal All The Way to the Bottom: This could be due to blockages on the track. Clear any debris and check if the door seals. If not, you might need to adjust the close limit switch.
   

1. Garage Door Reverses Before Hitting the Floor: This could be due to the close force setting needing adjustment or the rollers being in poor condition. Check the owner's manual for instructions on adjusting the close force. If this doesn't work, you might need to replace the rollers.
   

1. Garage Door Opens But Motor Keeps Running: This is usually due to the up limit switch being set too far from the motor unit. Move the switch closer to the motor unit. If this doesn't work, the switch might be faulty and need replacement.
   

1. Garage Door is Sagging: This could be due to uneven tension in the springs or worn out sections. You can adjust the tension in the springs, but if the door is still sagging, you might need to replace the sections or the door.
   

In conclusion, while some garage door problems can be fixed with simple troubleshooting, others require professional help. Regular maintenance can prevent many of these issues. Always prioritize safety when dealing with garage door problems. If you're unsure, it's best to call a professional.