• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any shards will fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is substantial, you may prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows to get at the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for fit. If you are happy with the size of the window repair, tighten the screws to secure them in the right position.

If you aren't able to move the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. The majority of the time this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. The first step is to close the window and then perform an initial test fit. The corner joints of the sash should align with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to take action if get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window harder to clean and reduce its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near by the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze It could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler when you have a person to assist in holding the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The problem can be caused either by opening the window improperly or due to a poor installation in the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you suggestions.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the risk of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. First, the hinges due to wear and tear could become misaligned. This will cause a gap to form where the sash joins the frame. This can be easily repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, may also be misaligned, and again it is feasible to give them a good clean, but in some instances it could be necessary to have them replaced.

The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to realize that all windows have a lifespan and they may reach an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as you can.